< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon Lumbar Switch
PartNumber: 25982130
Product Specifications- Notes: Power Seats, Ebony
- Location: Driver Side
- Other Names: Control Switch, Lumbar Switch
- Item Dimensions: 2.9 x 2.0 x 1.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Lumbar Switch
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$48.75 MSRP:$73.54You Save: $24.79 (34%)
OEM (Genuine) 2010 GMC Canyon Lumbar Switch
PartNumber: 25810336
Product Specifications- Notes: Power Seats, Ebony
- Location: Passenger Side
- Other Names: Control Switch, Lumbar Switch
- Item Dimensions: 5.5 x 5.4 x 3.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19149048
- Part Description: 2010 GMC Canyon Lumbar Switch
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$139.02 MSRP:$209.70You Save: $70.68 (34%)OEM (Genuine) 2010 GMC Canyon Lumbar Switch
PartNumber: 19168196Product Specifications- Notes: Power Seats, Cashmere
- Location: Driver Side
- Other Names: Lumbar Switch
- Item Dimensions: 5.6 x 5.5 x 3.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19149044, 19122143
- Part Description: 2010 GMC Canyon Lumbar Switch
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$72.73 MSRP:$109.72You Save: $36.99 (34%)
OEM (Genuine) 2010 GMC Canyon Seat Switch
PartNumber: 19122007
Product Specifications- Notes: Power Seats, Cashmere
- Location: Passenger Side
- Other Names: Seat Switch
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Seat Switch
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$73.75 MSRP:$111.25You Save: $37.50 (34%)OEM (Genuine) 2010 GMC Canyon Switch Asm, Driver Seat Adjuster *Ebony
PartNumber: 19121889
Product Specifications- Notes: Power Seats, Ebony
- Location: Driver Side
- Other Names: Seat Switch
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Switch Asm, Driver Seat Adjuster *Ebony
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Switch, Passenger Seat Adjuster
PartNumber: 89026978
Product Specifications- Notes: Power Seats, Ebony; Canyon, Colorado; Passenger Seat
- Location: Passenger Side
- Other Names: Adjuster Switch, Seat Switch
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Switch, Passenger Seat Adjuster
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Switch Asm, Driver Seat Adjuster *Cashmere
PartNumber: 19122144Product Specifications- Notes: Power Seats, Cashmere; Canyon, Colorado; Driver Seat
- Location: Driver Side
- Other Names: Adjuster Switch, Seat Switch
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Switch Asm, Driver Seat Adjuster *Cashmere
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Switch Asm, Passenger Seat Lumbar Control *Cashmere
PartNumber: 19168198Product Specifications- Notes: Power Seats, Cashmere
- Location: Passenger Side
- Other Names: Lumbar Switch
- Item Dimensions: 5.5 x 5.4 x 3.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19149047
- Part Description: 2010 GMC Canyon Switch Asm, Passenger Seat Lumbar Control *Cashmere
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Power Seat Switch Repair
Q: How to remove the Front Seat Center Latch Side Belt?
A:
You need to remove the rear inboard seat bolt from the passenger seat and remove the grommet securing the center seat belt assembly to the seat adjuster. Finally, you need to remove the center seat belt assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seat position sensor nuts?
A:
The recommended torque is 9 Nm (79 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Power Seat Switch?
A:
You need to connect the power seat switch harness to the seat harness and install the power seat switch to the seat bezel. Then you need to install the buttons on the switch and install the switch bezel assembly to the seat assembly. Finally, you need to install the seat cushion outer trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Power Seat Switch?
A:
You need to remove the seat cushion outer trim panel, and the switch bezel from the seat assembly, and remove the buttons from the switch. Then you need to release the tabs that retain the seat switch to the seat bezel. After that, you need to disconnect the power seat switch harness from the seat harness. Finally, you need to remove the power seat switch from the seat bezel.
By Bob
GM Specialist
01/11/2022Q: How to install the Lumbar Switch?
A:
You need to connect the lumbar switch harness to the seat harness and install the lumbar switch to the seat bezel. Then you need to install the buttons on the switch and install the switch bezel assembly to the seat assembly. Finally, you need to install the seat cushion outer trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Seat Center Latch Side Belt?
A:
You need to position the center seat belt assembly over the rear inboard seat adjuster mounting hole and install the front seat mounting bolt.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Seat Position Sensor?
A:
You need to remove the seat from the vehicle and ensure that the seat is in the full rear position. Then you need to locate the seat position sensor under the seat on the inside of the inner seat rail and disconnect the electrical connector from the seat position sensor. After that, you need to remove the 2 nuts that retain the seat position sensor to the seat rail. Finally, you need to remove the seat position sensor from the seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear bench seat back latch release strap bracket screws and the rear bench seat side trim cover screw?
A:
The recommended torque is 1.5 Nm (13 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Back Latch?
A:
You need to remove the seat back latch to the seat back frame with the 4 screws, and install the 2 screws securing the latch release strap bracket. Then you need to install the screw securing the side trim covers to the seat cushion frame and install the seat back cover and pad. Finally, you need to install the rear bench seat cushion in the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the front seat mounting bolt?
A:
The recommended torque is 52.5 Nm (39 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (9)