2010 GMC Canyon Parking Light Bulb

You need to secure the bulbs into the bulb sockets and to the lamp assembly and insert the inside edge of the lamp tabs into the grille support. Then you need to rotate the lamp assembly into the fender bracket and push on the outboard edge of the lamp. Finally, you need to inspect the lamps.

You need to ensure that the headlamp switch is in the OFF position and the ignition switch is in the LOCK position. Then you need to open the hood, and release the locking tab on the park, turn, the daytime running lamp assembly. After that, you need to rotate the outward edge of the lamp assembly forward and release the park/turn signal lamp socket. Finally, you need to remove the park and turn signal lamp bulb.