2010 GMC Canyon Interior Light Bulb

You need to secure the bulbs into the bulb sockets and to the lamp assembly and insert the inside edge of the lamp tabs into the grille support. Then you need to rotate the lamp assembly into the fender bracket and push on the outboard edge of the lamp. Finally, you need to inspect the lamps.

You need to turn the fog lamp switch to the OFF position and disconnect the electrical connector. Then you need to rotate the bulb socket counterclockwise. After that, you need to remove the socket from the fog lamp housing, then you can remove the bulb from the socket.

You need to connect the electrical connector to the bulb, and push in and rotate the high beam headlamp and low beam headlamp 1/4 turn clockwise. Then you need to install the bolts retaining the headlamp and inspect the headlamps for proper operation. Finally, you need to install the front grille.