2010 GMC Canyon Fuel Door Hinge

You need to install the hoist and the bolt. Then you need to install the Spare Tire Hoist shaft guide and install the mounting bolt for the guide. After that, you need to install the spare tire to the hoist and turn the hoist shaft clockwise until the spare tire is in position and the hoist clicks 2 times or it skips twice. Finally, you need to lower the vehicle.

You need to remove the rear side access door trim panel and remove the bolt retaining the rear side access Door Check link to the body. Then you need to remove the nuts retaining the rear side access door check link to the door. Finally, you need to remove the rear side access door check link from the door.

You need to position the body side front Door Hinge to the alignment marks and install the bolts retaining the body side door hinge to the body. Then you need to lower the front door and install the bolts retaining the front door hinge keeper straps. After that, you need to connect the front door wiring harness connectors, install the front door wiring harness grommet to the body, and install the bolt retaining the front door check link to the body. Finally, you need to inspect the door for proper operation and alignment.