< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Engine Mounts & Mounting Hardware
- Department
- Prices
OEM (Genuine) 2010 GMC Canyon Front Mount
PartNumber: 15925796
Product Specifications- Notes: Canyon, Colorado; Motor Mounts; Right; Canyon, Colorado; Right; 2.8 & 2.9 Liter; 3.5 & 3.7 Liter
- Location: Passenger Side
- Other Names: Front Mount, Mount
- Item Dimensions: 8.0 x 7.3 x 7.3 inches
- Item Weight: 4.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97287677
- Part Description: 2010 GMC Canyon Front Mount
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$65.35 MSRP:$108.19You Save: $42.84 (40%)
OEM (Genuine) 2010 GMC Canyon Rear Mount
PartNumber: 15138532
Product Specifications- Notes: Canyon, Colorado; Rear; W/O Off Road; 2.8 & 2.9 Liter, 2WD, W/O Z71; 3.5 & 3.7 Liter, 2WD, W/O Z71
- Other Names: Mount, Rear Mount
- Item Dimensions: 7.9 x 5.4 x 5.4 inches
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15112152
- Part Description: 2010 GMC Canyon Rear Mount
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$43.16 MSRP:$68.56You Save: $25.40 (38%)
OEM (Genuine) 2010 GMC Canyon Front Mount
PartNumber: 97287678
Product Specifications- Notes: Canyon, Colorado; Motor Mounts; Left; Canyon, Colorado; Left; 2.8 & 2.9 Liter; 3.5 & 3.7 Liter
- Location: Driver Side
- Other Names: Front Mount, Mount
- Item Dimensions: 7.8 x 7.6 x 7.4 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Front Mount
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$79.64 MSRP:$126.45You Save: $46.81 (38%)
OEM (Genuine) 2010 GMC Canyon Rear Mount
PartNumber: 15171918
Product Specifications- Notes: Canyon, Colorado; Trans Mounts; Canyon, Colorado; Rear; W/Off Road; 2.8 & 2.9 Liter, 4WD; 2.8 & 2.9 Liter, 2WD, W/Z71; 3.5 & 3.7 Liter, 4WD; 3.5 & 3.7 Liter, 2WD, W/Z71
- Other Names: Mount, Rear Mount
- Item Dimensions: 5.2 x 5.2 x 10.2 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Rear Mount
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2010 GMC Canyon Front Mount
PartNumber: 15931529
Product Specifications- Notes: Canyon, Colorado; Left; 5.3 Liter
- Location: Driver Side
- Other Names: Front Mount
- Item Dimensions: 8.2 x 7.1 x 13.3 inches
- Item Weight: 9.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Front Mount
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 GMC Canyon Front Mount
PartNumber: 15931530
Product Specifications- Notes: Canyon, Colorado; Right; 5.3 Liter
- Location: Passenger Side
- Other Names: Front Mount
- Item Dimensions: 8.2 x 7.3 x 7.4 inches
- Item Weight: 5.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Front Mount
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
FAQ for Engine Mount Bracket Repair
Q: What is the recommended torque for the bolts securing the engine lift bracket to the engine?
A:
The recommended torque is 5 Nm (44 lb in) and 50 Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Engine Lift Bracket?
A:
You need to position the engine lift bracket from the engine and install the bolts securing the engine lift bracket to the engine and position the generator to the engine. Then you need to install the generator bolts in sequence and engage the engine wiring harness conduit to the engine lift bracket. After that, you need to install the bolt securing the A/C compressor hose/pipe bracket to the engine lift bracket. Finally, you need to install the drive belt.
By Bob
GM Specialist
01/11/2022Q: How to remove the Engine Lift Bracket?
A:
You need to remove the drive belt and remove the bolt securing the A/C compressor hose/pipe bracket to the engine lift bracket. Then you need to carefully disengage the engine wiring harness conduit from the engine lift bracket, remove the 3 generator bolts, and remove the bolts securing the engine lift bracket to the engine. Finally, you need to remove the engine lift bracket from the engine.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolt securing the A/C compressor hose/pipe bracket to the engine lift bracket?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022