Q: What is the recommended torque for the engine mount bolts?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the engine mount-to-frame bracket through bolt?
A:
The recommended torque is 85 Nm (63 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How to remove the Engine Mount?
A:
You need to remove the wheel and tire assembly, the engine shield, and the lower intermediate steering shaft. Then you need to support the engine and remove the engine mount-to-frame bracket through bolt. After that, you need to loosen the right side through bolt, remove the heater pipe bracket bolt from the engine mount, and raise the engine. Finally, you need to remove the engine mount bolts, then you can remove the engine mount.
By Bob
GM Specialist
01/11/2022
Q: How to install the Engine Mount?
A:
You need to install the engine mount, and the engine mount bolts. Then you need to lower the engine and install the engine mount-to-frame bracket through bolt. After that, you need to remove the jack stand and install the engine shield if equipped. Finally, you need to install the wheel and tire assembly.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque for the bolts securing the engine lift bracket to the engine?
A:
The recommended torque is 5 Nm (44 lb in) and 50 Nm (37 lb-ft).