FAQ for Door Seal Repair
Q: How to remove the Side Door Window Weatherstrip?
A:
You need to remove the front door trim panel, the front door water deflector, and the front window outer belt sealing strip. Then you need to remove the front door window. Finally, you can remove the window weatherstrip from the front door window channel.
By BobGM Specialist
01/11/2022 Q: How to install the Weatherstrip Replacement Rear Side Access Door?
A:
You need to position the weatherstrip to the rear side access door, and install the upper molded detail to the front of the rear side access door and the lower molded detail to the front of the rear side access door. Then you need to install the weatherstrip around the rear door frame using the integral retainers.
By BobGM Specialist
01/11/2022 Q: How to install the Front Door Opening Weatherstrip?
A:
You need to position the front door opening weatherstrip to the pinch-weld flange, and press the front door opening weatherstrip onto the pinch-weld flange. Then you need to install the lower center pillar panel and pull the cord on the front door opening weatherstrip.
By BobGM Specialist
01/11/2022 Q: How to remove the Rear Door Opening Weatherstrip?
A:
You need to open the door and remove the lower center pillar trim panel. Then you need to remove the rear door opening weatherstrip from the door opening pinch-weld flange, and remove the rear door opening weatherstrip from the vehicle.
By BobGM Specialist
01/11/2022 Q: How to install the Rear Side Door Window Weatherstrip?
A:
You need to position the rear door window weatherstrip to the rear door, firmly seat the window weatherstrip into the rear door window channel, and inspect the rear door window for proper operation. Then you need to install the rear window outer belt sealing strip and install the rear door trim panel.
By BobGM Specialist
01/11/2022 Q: How to remove the Weatherstrip Replacement Rear Side Access Door?
A:
You need to remove the upper molded detail from the front of the side access door and remove the lower molded detail from the front of the side access door. Then you need to remove the weatherstrip from around the door. Finally, you can remove the weatherstrip from around the door.
By BobGM Specialist
01/11/2022 Q: How to remove the Rear Side Door Window Weatherstrip?
A:
You need to position the door window as needed for service, remove the rear door trim panel, and remove the rear window outer belt sealing strip. Finally, you can remove the window weatherstrip from the rear door window channel.
By BobGM Specialist
01/11/2022 Q: How to remove the Rear Side Door Wedge?
A:
You need to apply tape to the area around the wedge, heat the wedge using a heat gun 152 mm (6 in) from the surface and apply the heat for about 30 seconds. Then you need to remove the wedge from the body and remove all adhesive from the body. Finally, you need to clean the body surface.
By BobGM Specialist
01/11/2022 Q: Which tool is required during the Rear Door Weatherstrip replacement?
A:
You need to prepare the J 38778 Door Trim Pad Clip Remover or Equivalent.
By BobGM Specialist
01/11/2022 Q: How to remove the Rear Door Weatherstrip?
A:
You need to remove the weatherstrip from around the door and remove the weatherstrip from the rear door.
By BobGM Specialist
01/11/2022 See more FAQs (14)