2010 GMC Canyon Door Lock Cylinder

You need to code the new lock cylinder, install the lock cylinder to the endgate handle, and install the bolt retaining the lock cylinder to the endgate handle. Then you need to install the lock rod to the retaining clip and connect the clip retaining the lock rod to the lock cylinder. Finally, you need to install the endgate cover.

You need to remove the endgate cover and disconnect the clip retaining the lock rod to the lock cylinder. Then you need to remove the lock rod from the retaining clip and remove the bolt retaining the lock cylinder to the endgate handle. Finally, you need to remove the lock cylinder from the endgate handle.

You need to install the lock cylinder to the front outside door handle and install the bolts retaining the lock cylinder to the outside door handle. Then you need to install the front outside door handle. After that, you need to install the front door water deflector. Finally, you need to install the front door trim panel.

You need to remove the front door trim panel and remove the front door water deflector. Then you need to remove the front outside door handle. After that, you need to remove the bolts retaining the lock cylinder to the front outside door handle. Finally, you need to remove the lock cylinder from the door.

The recommended torque is 9 Nm (80 lb in).