< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Canyon Seal, Engine Front Cover
PartNumber: 12585673
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.5 x 3.5 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12550565, 12561244
- Part Description: 2010 GMC Canyon Seal, Engine Front Cover
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
$22.54 MSRP:$44.74You Save: $22.20 (50%)
Victor Reinz® Rear Improved Design Crankshaft Seal for 2010 GMC Canyon
PartNumber: 19-10080-01Product Specifications- Notes: 1 Piece;Premium, Improved Design; PTFE Rubber; Rear
- Material: PTFE Rubber
- Part Description: 2010 GMC Canyon Rear Improved Design Crankshaft Seal
Vehicle Fitment- 2010 GMC Canyon | All Trims | 8 Cyl 5.3L
$28.15
OEM (Genuine) 2010 GMC Canyon Crankshaft Seal
PartNumber: 89060436
Product Specifications- Notes: Canyon, Colorado
- Other Names: Crankshaft Seal, Rear Main Seal
- Item Dimensions: 5.2 x 5.1 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12585671, 89018162, 12550574
- Part Description: 2010 GMC Canyon Crankshaft Seal
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
$21.04 MSRP:$34.84You Save: $13.80 (40%)
OEM (Genuine) 2010 GMC Canyon Front Cover Seal
PartNumber: 89017622
Product Specifications- Notes: 2.8 & 2.9 Liter; 3.5 & 3.7 Liter; Canyon, Colorado
- Item Dimensions: 6.1 x 6.2 x 0.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Front Cover Seal
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$15.46 MSRP:$25.57You Save: $10.11 (40%)
OEM (Genuine) 2010 GMC Canyon Rear Main Seal
PartNumber: 89018205
Product Specifications- Notes: Canyon, Colorado
- Other Names: Rear Main Seal
- Item Dimensions: 4.2 x 4.1 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12568124
- Part Description: 2010 GMC Canyon Rear Main Seal
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$20.88 MSRP:$34.58You Save: $13.70 (40%)
SKF® Rear Crankshaft Seal for 2010 GMC Canyon
PartNumber: 38617Product Specifications- Quantity Per Application: 1
- UPC: 085311492904
- Part Description: 2010 GMC Canyon Rear Crankshaft Seal
Vehicle Fitment- 2010 GMC Canyon | All Trims | 8 Cyl 5.3L
$26.81OEM (Genuine) 2010 GMC Canyon Rear Main Seal Retainer
PartNumber: 12579713
Product Specifications- Notes: Canyon, Colorado
- Other Names: Rear Main Seal Retainer
- Item Dimensions: 19.9 x 14.4 x 3.4 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12580519
- Part Description: 2010 GMC Canyon Rear Main Seal Retainer
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Crankshaft Seal Repair
Q: What is the recommended torque for the oil pan bolts?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: Which tool is required during the Crankshaft Front Oil Seal replacement?
A:
You need to prepare a J 45951 Front Seal Installer.
By Bob
GM Specialist
29/10/2022Q: What special tools are required during the Crankshaft Rear Oil Seal and Housing replacement?
A:
You need to prepare a J 8092 Driver Handle and a J 44215 Rear Seal Installer.
By Bob
GM Specialist
29/10/2022Q: How to remove the Crankshaft Rear Oil Seal and Housing?
A:
You need to remove the flywheel, and the 2 bolts securing the oil pan to the crankshaft rear oil seal housing. Then you need to remove the crankshaft rear oil seal housing bolts, and you need to install 2 bolts into the threaded holes to act as jack screws and tighten evenly to release the crankshaft rear oil seal housing from the engine block and oil pan. After that, you need to remove the crankshaft rear oil seal housing and remove the 2 bolts from the jack screw holes, and you also need to remove the crankshaft rear oil seal from the crankshaft rear oil seal housing and discard the seal. Finally, you need to clean and inspect the crankshaft rear oil seal housing, and the engine block and oil pan sealing surface.
By Bob
GM Specialist
29/10/2022Q: How to remove the Crankshaft Front Oil Seal?
A:
You need to remove the crankshaft balancer, pry out the crankshaft front oil seal, and discard the seal.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the crankshaft rear oil seal housing bolts?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
29/10/2022Q: How to install the Crankshaft Front Oil Seal?
A:
You need to apply the engine oil to the outside diameter of the crankshaft front oil seal. Then you can install the new crankshaft front oil seal, and install the crankshaft balancer.
By Bob
GM Specialist
29/10/2022Q: How to install the Crankshaft Rear Oil Seal and Housing?
A:
You need to apply a 3 mm (0.12 in) bead of sealer and install the crankshaft rear oil seal housing. Then you need to install the crankshaft rear oil seal housing bolts and install the 2 oil pan bolts. After that, you need to lightly lubricate the crankshaft rear oil seal lip with clean engine oil. Finally, you need to position the plastic installation sleeve supplied with the new seal to the crankshaft.
By Bob
GM Specialist
29/10/2022See more FAQs (3)