2010 GMC Canyon Clutch Master Cylinder

You need to disengage the retainer from the clutch pedal pin and raise and support the vehicle. Then you need to push back the white plastic sleeve on the quick connect to separate the hydraulic clutch hose from the clutch actuator quick connect. After that, you need to disconnect the clutch hydraulic hose retainer from the inner fender and lower the vehicle. Finally, you need to rotate the clutch master cylinder clockwise 1/8 turn, then you can remove the clutch master cylinder with the hydraulic hose from the cowl.

You need to prepare a J 42371 Hydraulic Clutch Line Separator.

You need to ensure that the clutch hydraulic hose does not come in contact with any sharp or potentially hot surfaces.