2010 GMC Canyon Cigarette Lighters

You need to remove the 12-volt power supply or cigar lighter fuse, and you need to remove the socket by placing one side of the °T° portion of the tool J 42059 into the socket and the square window tab. Then you need to position the opposite °T° portion of the tool into the opposing square window tab and pull the socket straight out of the retaining ring. After that, you need to remove the tool from the socket and disconnect the electrical connector from the socket. Finally, you need to remove the socket retaining ring by pulling the retaining ring out of the mounting hole.

You need to position the retaining ring to the mounting hole, and index the key to the retaining ring to the slot in the mounting hole. Then you need to install the retaining ring, and you need to connect the electrical connector to the socket. After that, you need to position the socket to the retaining ring and install the socket into the retaining ring. Finally, you need to install the 12-volt power supply or cigar lighter fuse.

You need to prepare a J 42059 Cigarette Lighter Socket Remover.