< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Brake Pads, Discs & Calipers
- Department
- Brands
- Prices
Centric® Premium Vented Front Brake Rotor for 2010 GMC Canyon
PartNumber: 120.66072Product Specifications- UPC: 805890520092
- Part Description: 2010 GMC Canyon Premium Vented Front Brake Rotor
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$56.64
Power Stop® PowerStop Evolution Coated Rotor for 2010 GMC Canyon
PartNumber: AR82131EVCProduct Specifications- Bolt Circle: 112mm (4.41")
- Hub Hole Diameter: 92.2mm (3.63")
- Lug Holes Quantity: 6
- Lug Holes Size: 304.8mm (12")
- Minimum Thickness: 27.5mm (1.08")
- Nominal Thickness: 29mm (1.14")
- Quantity: 1 Per Pack
- Rotor Construction: 1-Piece
- Rotor Design: Rotors Only
- Rotor Diameter: 298mm (11.73")
- Rotor Height: 40mm (1.57")
- Rotor Style: Plain
- Part Description: 2010 GMC Canyon PowerStop Evolution Coated Rotor
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$53.56
DuraGo® Vented Front Brake Rotor for 2010 GMC Canyon
PartNumber: BR900634Product Specifications- Bolt Circle: 112mm (4.41")
- Center Hole Diameter: 92.1mm (3.63")
- Lug Holes Quantity: 6
- Lug Holes Size: M12 x 1.25
- Minimum Thickness: 27.5mm (1.08")
- Nominal Thickness: 29mm (1.14")
- Quantity: 1 Per Pack
- Rotor Construction: 1-Piece
- Rotor Design: Rotors Only
- Rotor Diameter: 298mm (11.73")
- Rotor Height: 40mm (1.57")
- Rotor Style: Plain
- Rotor Vane Type: Non-Directional
- UPC: 756632167818
- Part Description: 2010 GMC Canyon Vented Front Brake Rotor
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$35.75
Centric® GCX Plain 1-Piece Front Brake Rotor for 2010 GMC Canyon
PartNumber: 320.66072Product Specifications- UPC: 889590302264
- Part Description: 2010 GMC Canyon GCX Plain 1-Piece Front Brake Rotor
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$47.14
OEM (Genuine) 2010 GMC Canyon Front Brake Rotor Assembly
PartNumber: 25832146
Product Specifications- Notes: W/O Z71-Off Road Pkg; 4WD; W/Z71-Off Road Pkg
- Location: Driver Side; Passenger Side
- Other Names: Rotor
- Item Dimensions: 13.8 x 13.8 x 3.5 inches
- Item Weight: 22.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Front Brake Rotor Assembly
Vehicle Fitment- 2010 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Bosch® QuietCast™ Premium Front Brake Rotor for 2010 GMC Canyon
PartNumber: 25011458Product Specifications- Quantity: 1 Per Pack
- Rotor Construction: 1-Piece
- Rotor Design: Rotors Only
- Rotor Style: Plain
- UPC: 077212086016
- Part Description: 2010 GMC Canyon QuietCast™ Premium Front Brake Rotor
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
FAQ for Brake Disc Repair
Q: How to install the Brake Rotor?
A:
You need to clean all rust and contaminants from the mating surfaces of the hub flange and rotor and inspect the mating surfaces of the hub/axle flange and the rotor. Then you need to position the wheel hub to the brake rotor and install the 6-wheel hub bolts and the wheel bearing and hub assembly. Finally, you need to install the tire and wheel assembly.
By Bob
GM Specialist
01/11/2022Q: How to burnish the Brake Pad and Rotor?
A:
You need to select a smooth road with little or no traffic and accelerate the vehicle to 48 km/h (30 mph). Then you need to apply the brakes to bring the vehicle to a stop. After that, you need to keep accelerating and stopping until approximately 20 stops have been completed.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the hub bolts?
A:
The recommended torque is 120 Nm (89 lb-ft).
By Bob
GM Specialist
01/11/2022Q: Which special tool is required during the Brake Rotor refinishing?
A:
You need to prepare a CH-47661 On-Vehicle Brake Lathe.
By Bob
GM Specialist
01/11/2022Q: How to remove the Brake Rotor?
A:
You need to remove the wheel bearing and hub assembly and remove the 6-wheel hub bolts. Then you need to separate the wheel hub from the brake rotor. Finally, you need to clean the wheel hub and brake rotor mating surfaces to remove any debris or corrosion.
By Bob
GM Specialist
01/11/2022Q: How to refinish the Brake Rotor?
A:
You need to use a micrometer to measure the thinnest point of the brake rotor, and you need to use the CH-47661 to refinish the brake rotor. Then you need to use 120 grit aluminum oxide sandpaper and a non-directional rotor finisher, if available, to create a non-directional braking surface. Finally, you need to clean the braking surfaces with GM P/N 12377981 (Canadian P/N 10953463) or equivalent, brake parts cleaner.
By Bob
GM Specialist
01/11/2022See more FAQs (1)