< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
Emission Control
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Canyon Pump, Secondary Air Injection(W/Bracket)
PartNumber: 15928252
Product Specifications- Other Names: Air Injection Reactor Pump
- Item Dimensions: 12.4 x 8.2 x 8.3 inches
- Item Weight: 5.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15103159
- Part Description: 2010 GMC Canyon Pump, Secondary Air Injection(W/Bracket)
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Cardone Reman® Remanufactured Smog Air Pump for 2010 GMC Canyon
PartNumber: 32-2403MProduct Specifications- E-Waste: Yes
- Mounting Hole Count: 3
- Part Description: 2010 GMC Canyon Remanufactured Smog Air Pump
Vehicle Fitment- 2010 GMC Canyon | All Trims | 5 Cyl 3.7L
- 2010 GMC Canyon | All Trims | 4 Cyl 2.9L
FAQ for Air Injection Pump Repair
Q: How to remove the Secondary Air Injection Pump?
A:
You need to open the hood and remove the air cleaner outlet duct, and you need to disconnect the secondary air injection (AIR) pump inlet hose quick connect fitting from the pump, and you need to disconnect the AIR pump outlet hose quick connect fitting from the pump. Then you need to remove the engine shield, and you need to disconnect the engine wiring harness electrical connector from the AIR pump wiring harness electrical connector. After that, you need to squeeze the AIR pump wiring harness electrical connector clip together and push up to separate the clip/connector from the bracket, and open the AIR pump wiring harness clip and remove the harness from the clip, and you also need to remove the AIR pump nuts and lower the vehicle. Finally, you need to reposition the AIR pump inlet and outlet hoses as necessary to remove the pump, then you can remove the AIR pump.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the AIR pump nuts?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022