FAQ for Window Switch Repair
Q: How many screws does the front side door lock and side window switch have?
A:
It has 3 screws.
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the door lock and side window switch-driver side (with RPO AXE or AXC)?
A:
You shall remove the driver-side door trim panel.
By BobGM Specialist
01/11/2022 Q: How to service the front side door lock and side window switch assembly?
A:
You shall lift upward at the rear edge of the switch assembly, slide up and out of the door panel, disconnect the electrical connector from the switch assembly, and transfer parts as necessary.
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the rear side door window switch (traverse)?
A:
The procedure is to remove the rear door trim panel.
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the door lock and side window switch-passenger side (with RPO AXE or AXC)?
A:
You shall remove the passenger side door trim panel.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the front side door lock and side window switch screws?
A:
The recommended torque is 3 N.m (27 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the rear switch plate screw?
A:
The recommended torque is 2 N.m (16 lb in).
By BobGM Specialist
01/11/2022 Q: What is the door lock and side window switch service procedure?
A:
First, lift upward at the rear edge of the switch assembly then slide up and out of the door panel. Next disconnect the electrical connector from the switch assembly.
By BobGM Specialist
09/03/2022 Q: What is the rear side door switch service procedure?
A:
First, remove the rear door trim panel and tighten the rear switch plate screw to 2 Nm.
By BobGM Specialist
07/03/2022 See more FAQs (4)