Part Description: 2010 Chevrolet Traverse Motor Asm-Rear Side Door Window Regulator
More Info
Vehicle Fitment
2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
FAQ for Window Motor Repair
Q: How to program the power windows?
A:
You shall lower each window to the full down position, hold each window switch at the full down position for 5 seconds, raise each window to the full up position, hold each window switch at the full up position for 5 seconds, and verify that the express down and express up features are working by pressing the power window switch past its first detent and releasing and pulling the power window switch past its first detent and releasing.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for door window regulator motor bolts?
A:
The recommended torque is 5 N.m (9 lb in).
By Bob
GM Specialist
01/11/2022
Q: How many bolts does the door window regulator motor attach?
A:
It attaches 2 bolts.
By Bob
GM Specialist
01/11/2022
Q: What is the preliminary procedure for servicing the door window regulator motor?
A:
You shall remove the window regulator.
By Bob
GM Specialist
01/11/2022
Q: What is the door window regulator motor service procedure?
A:
Remove the window regulator and reprogram the window motor. Tighten the door window regulator motor bolts to 5 Nm. Tighten the door window regulator motor stud bolt to 5 Nm.
By Omar
GM Specialist
09/03/2022
FAQ for Other Repair Info
Q: How to remove the rear side door window regulator?
A:
You shall remove the door trim panel, the water deflector, the energy absorber retainers, the energy absorber, the regulator/motor from the door, the Window Regulator motor, and the regulator.
Q: How to install the rear side door window channel?
A:
You need to install the weatherstrip/run channel to the door and press the weatherstrip/run channel into the window frame opening.
Q: How many screws does the front side door lock and side window switch have?