Part Description: 2010 Chevrolet Traverse Windshield Washer Pump
More Info
Vehicle Fitment
2010 Chevrolet Traverse | All Trims | All Engines
FAQ for Washer Pump Repair
Q: How to service the windshield washer pump assembly?
A:
You shall, using two flat-bladed tools, at the pump gasket, pry upwards until the washer pump is dislodged from the washer container, and discard the windshield washer pump grommet.
By Bob
GM Specialist
01/11/2022
Q: What is the preliminary procedure for servicing the washer pump?
A:
The procedure is to remove the LF wheelhouse liner to access the washer pumps, drain the washer solvent into a clean suitable container, and disconnect the electrical connector and the washer pump hose.
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the Washer Pump?
A:
You will need to remove the LF Wheel House liner, drain the washer solvent, then you will need to disconnect the electrical connector and the washer pump hose.
By Bob
GM Specialist
04/03/2022
FAQ for Other Repair Info
Q: What items should be tested and repaired where the windshield wipers chatter and/or wipe unevenly?
A:
You shall clean the windshield glass and the Wiper Blade elements, perform the wiper arm pressure test, and inspect the wiper blade element set.
Q: What is the preliminary procedure for servicing the windshield washer solvent heater (traverse)?
A:
You shall remove the air cleaner outlet duct.
Q: What is the recommended torque for the rear window wiper arm nut?