< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Steering Systems
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Lower Shaft
PartNumber: 20887805
Product Specifications- Notes: From 9/09; Traverse; From 9/01/09
- Other Names: Lower Shaft
- Item Dimensions: 12.2 x 6.3 x 4.4 inches
- Item Weight: 3.50 Pounds
- Replaced by: 84326107
- Part Description: 2010 Chevrolet Traverse Lower Shaft
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$97.43 MSRP:$154.70You Save: $57.27 (38%)OEM (Genuine) 2010 Chevrolet Traverse Intermediate Steering Shaft Assembly
PartNumber: 15115366
Product Specifications- Notes: To 8/09; Traverse; To 8/31/09
- Other Names: Intermediate Shaft, Lower Shaft
- Item Dimensions: 9.0 x 8.8 x 8.6 inches
- Item Weight: 4.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Intermediate Steering Shaft Assembly
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
FAQ for Steering Shaft Repair
Q: How to remove the intermediate steering shaft?
A:
You shall turn the steering wheel to the straight forward position and lock it in place, hoist the vehicle and raise it, disengage the intermediate steering shaft boot from the steering gear and the intermediate steering shaft upper seal, and remove the left side instrument panel insulator panel and the intermediate steering shaft.
By Bob
GM Specialist
02/11/2022Q: How to install the intermediate steering shaft?
A:
You shall install the intermediate steering shaft, the left-side instrument panel insulator panel, and the intermediate steering shaft boot.
By Bob
GM Specialist
02/11/2022Q: How to remove the intermediate steering shaft boot?
A:
You shall turn the steering wheel to the straight forward position and lock it in place, remove the left front tire/wheel assembly, disengage the intermediate steering shaft boot from the steering gear and the intermediate steering shaft upper seal, separate the intermediate steering shaft from the steering gear, and remove the intermediate steering shaft boot.
By Bob
GM Specialist
02/11/2022Q: How to install the intermediate steering shaft boot?
A:
The proper way is to install the intermediate steering shaft boot, the intermediate steering shaft, the intermediate steering shaft bolt, the intermediate steering shaft upper seal, and the left front tire/wheel assembly.
By Bob
GM Specialist
02/11/2022Q: How do you install the intermediate steering shaft boot?
A:
You can install the intermediate steering shaft boot, the intermediate steering shaft gear, and the left front tire/wheel.
By Bob
GM Specialist
10/03/2022Q: What is the intermediate steering shaft installation procedure?
A:
Install the intermediate steering shaft from the inside vehicle, the intermediate steering shaft to the steering column, and the left-side instrument panel insulator panel. Place the intermediate steering shaft to the steering gear and tighten the steering shaft bolt to 22 Nm. Finally, install the intermediate steering shaft boot to the steering gear and the intermediate steering shaft upper seal.
By Bob
GM Specialist
08/03/2022Q: What is the removal procedure for the intermediate steering shaft boot?
A:
The procedure is to remove the left tire/wheel, the intermediate steering shaft bolt, and the steering shaft boot.
By Bob
GM Specialist
05/03/2022See more FAQs (2)