FAQ for Shift Knob Repair
Q: How to install the transmission control lever knob?
A:
You shall install the shift control knob, the tap up/tap down switch electrical wire harness and the floor console left extension panel.
By BobGM Specialist
02/11/2022 Q: How to remove the transmission control lever knob?
A:
You shall remove the floor console left extension panel, the tap up/tap down switch electrical wire harness, the shift control knob screw from the shift control knob, and the shift control knob from the shift control lever.
By BobGM Specialist
02/11/2022 Q: How do I remove the Transmission Control Lever Knob?
A:
Start with applying the parking brake, then remove the floor console left extension panel. Disconnect the transmission tap up/tap down switch electrical connector. Remove the tap-up/tap-down switch electrical wire harness. Then rotate the key to the run position but don't turn the vehicle on. Move the shift control lever rearward. Carefully apply downward pressure to the shift knob trim ring to separate the trim ring from the shift knob and remove the shift knob from the lever.
By OmarGM Specialist
11/03/2022 Q: How many nuts attach to the Automatic Transmission Control?
A:
4Nuts attach the Automatic Transmission Control.
By BobGM Specialist
10/03/2022 Q: W: what is the recommended bolt torque for the Transmission Range Selector Lever Nut?
A:
The recommended bolt torque is 30 Nm (22 LB-FT).
By BobGM Specialist
09/03/2022 Q: What is the recommended bolt torque for the Automatic Transmission Control Nut?
A:
The recommended bolt torque is 25 Nm (18 LB-FT).
By OmarGM Specialist
07/03/2022 Q: What is the recommended bolt torque for the control knob screw?
A:
The recommended bolt torque is 4 Nm (35 LB IN).
By BobGM Specialist
07/03/2022 Q: What will need to be removed before servicing the Transmission Control?
A:
You will need to remove the console trim plate.
By OmarGM Specialist
03/03/2022 See more FAQs (3)