SAE Specification: SAE J20R4 Class D-1, SAE J1684 Type EC
Trunk Height: 18
UPC: 036687689382
Part Description: 2010 Chevrolet Traverse Engine Coolant Curved Radiator Hose
More Info
Vehicle Fitment
2010 Chevrolet Traverse | All Trims | All Engines
FAQ for Radiator Hose Repair
Q: What is the preliminary procedure for servicing the radiator inlet hose?
A:
The procedure is to drain the coolant and remove the front compartment sight shield.
By Bob
GM Specialist
01/11/2022
Q: What kind of tools will be required while servicing the radiator inlet hose clamp?
A:
The tools required include J 38185 Hose Clamp Pliers.
By Bob
GM Specialist
01/11/2022
Q: How many clamps does the radiator inlet hose have?
A:
It has 2 clamps.
By Bob
GM Specialist
01/11/2022
Q: What is the radiator inlet hose service procedure?
A:
First, drain the coolant and remove the front compartment sight shield. Tighten the radiator inlet hose clamps using the J 38185.
By Bob
GM Specialist
07/03/2022
Q: What is the radiator outlet hose service procedure?
A:
First, drain the coolant and remove the front compartment sight shield. Install the radiator outlet hose clamp.
By Omar
GM Specialist
07/03/2022
FAQ for Other Repair Info
Q: How to remove the water pump?
A:
You shall remove the drive belt, the right engine strut mount, the right engine mount strut bracket, the Water Pump pulley, the water pump, and the water pump seal.
Q: What should be noticed while servicing the radiator's lower grille?
A:
You shall release the retainer tabs securing the lower Radiator grille to the front bumper fascia opening.
Q: What is the recommended torque for coolant recovery reservoir bolts?