FAQ for Pillar Panels Repair
Q: What is the preliminary procedure for servicing the quarter upper trim panel (TB5)?
A:
The procedure is to disable the SIR system and remove the seat belt anchor bolt.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the windshield side garnish molding screw?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
02/11/2022 Q: How to service the rear quarter lower trim panel assembly?
A:
You shall pull outward to disengage the trim panel retainers, and disconnect the electrical connectors.
By BobGM Specialist
02/11/2022 Q: How to service the cargo screen retainer assembly?
A:
You shall twist and pull outward to remove the retainer.
By BobGM Specialist
02/11/2022 Q: What is the preliminary procedure for servicing the rear quarter lower trim panel assembly?
A:
The procedure is to pull outward to disengage the trim panel retainers and disconnect the electrical connectors.
By BobGM Specialist
02/11/2022 Q: What is the preliminary procedure for servicing the body lock pillar upper trim panel?
A:
You shall remove the seat belt anchor bolt and the rear quarter lower trim panel.
By BobGM Specialist
02/11/2022 Q: What is the preliminary procedure for servicing the windshield garnish molding-right side?
A:
The procedure is to disable the SIR system.
By BobGM Specialist
02/11/2022 Q: What should be noticed while servicing the body side trim panel armrest?
A:
You shall pull upward on the armrest to disengage the retainer clips.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the center pillar upper garnish molding screw?
A:
The recommended torque is 2N.m (18 lb in).
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for cargo tie-down loop bolts?
A:
The recommended torque is 3 N.m (27 lb in).
By BobGM Specialist
02/11/2022 See more FAQs (42)