FAQ for Liftgates Repair
Q: What is the preliminary procedure for servicing the liftgate side upper sensor?
A:
The procedure is to remove the liftgate trim panel and disconnect the electrical connector.
By BobGM Specialist
01/11/2022 Q: What kind of tools will be required when servicing the liftgate window?
A:
The tools required include J 24402-A Glass Sealant Remover (Cold Knife), J 39032 Stationary Glass Removal Tool, and a urethane adhesive system that meets GM Specification GM 3651G.
By BobGM Specialist
01/11/2022 Q: What should be noticed while removing the liftgate window?
A:
Before cutting out a stationary window, you shall apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
By BobGM Specialist
01/11/2022 Q: How many retainers does the sensor side upper liftgate attach?
A:
It attaches 4 retainers.
By BobGM Specialist
01/11/2022 Q: How many nuts does the liftgate handle attach?
A:
It attaches 2 nuts.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for liftgate handle nuts?
A:
The recommended torque is 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the liftgate outside handle?
A:
You shall remove the liftgate trim panel.
By BobGM Specialist
01/11/2022 Q: What is the liftgate outside handle service procedure?
A:
Remove the liftgate trim panel, and the rearview camera and disconnect the electrical connector. Tighten the liftgate handle nuts to 9 Nm.
By BobGM Specialist
08/03/2022 Q: What is the liftgate side upper sensor service procedure?
A:
First, remove the liftgate trim panel and disconnect the electrical connector. Retainers are for one-time use only.
By BobGM Specialist
08/03/2022 Q: What special tool will I need when servicing the Liftgate Window?
A:
You will need a glass sealant remover, a stationary glass removal tool, and a urethane adhesive.
By BobGM Specialist
03/03/2022 See more FAQs (6)