FAQ for Hvac Heater Blend Door Actuator Repair
Q: What is the preliminary procedure for servicing the temperature valve actuator-right side?
A:
You shall remove the instrumental panel insulator-right side.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the right temperature actuator screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the auxiliary mode valve actuator?
A:
The procedure is to remove the right rear quarter trim panel, the rear wheelhouse liner panel, and the HVAC module mounting nuts, reposition the auxiliary HVAC module inward to gain access to the mode door actuator and disconnect the electrical connector from the mix door actuator.
By BobGM Specialist
01/11/2022 Q: How many screws does the temp door actuator attach?
A:
It attaches 2 screws.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for mode door actuator screws?
A:
The recommended torque is 2.5 N.m (16 lb in).
By BobGM Specialist
01/11/2022 Q: What should be noted when servicing the temperature valve actuator-left side?
A:
To avoid actuator damage, you must not apply power to the actuator when it is not installed in the HVAC module.
By BobGM Specialist
01/11/2022 Q: How many screws does the mode door actuator attach?
A:
The mode door actuator attaches 2 screws.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for left temperature actuator screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for mode actuator screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: How many screws does the mode actuator attach?
A:
It attaches 3 screws.
By BobGM Specialist
01/11/2022 See more FAQs (21)