< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Lock Switch
PartNumber: 15804094
Product Specifications- Notes: Traverse; W/O Special Edition Op.; Right; Passenger Side, 2009-12, W/O Memory Pkg
- Location: Passenger Side
- Other Names: Lock Switch, Window Switch
- Item Dimensions: 2.7 x 2.0 x 1.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Lock Switch
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$17.20 MSRP:$28.45You Save: $11.25 (40%)
Dorman® OE Solutions Front Passenger Side Door Lock Switch for 2010 Chevrolet Traverse
PartNumber: 901-109Product Specifications- Notes: w/Pwr Windows; Single Door Lock Switch
- Attached Lead Wires: No
- Housing Material: Plastic
- Master Switch: Yes
- OE Part Number: 15804094
- UPC: 885484426481
- Wiring Harness Included: No
- Part Description: 2010 Chevrolet Traverse OE Solutions Front Passenger Side Door Lock Switch
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
$16.94
OEM (Genuine) 2010 Chevrolet Traverse Lock Switch
PartNumber: 25867270
Product Specifications- Notes: Traverse; W/O Special Edition Op.; Left; Driver Side, 2009-12, W/O Memory Pkg
- Location: Driver Side
- Other Names: Lock Switch
- Item Dimensions: 3.1 x 2.1 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Lock Switch
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$10.52 MSRP:$16.66You Save: $6.14 (37%)
OEM (Genuine) 2010 Chevrolet Traverse Nut - Push In, Multi Thread W/Sealer
PartNumber: 11610157
Product Specifications- Notes: 2009-12
- Item Dimensions: 1.2 x 1.0 x 0.6 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11517228, 17997722
- Part Description: 2010 Chevrolet Traverse Nut - Push In, Multi Thread W/Sealer
Vehicle Fitment- 2010 Chevrolet Traverse | High Country, L, LS, LT, LTZ, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
$13.06 MSRP:$18.75You Save: $5.69 (31%)
OEM (Genuine) 2010 Chevrolet Traverse Switch Asm-Lift Gate Release
PartNumber: 25897955
Product Specifications- Other Names: Lock Switch, Release Switch
- Item Dimensions: 15.1 x 2.6 x 1.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Switch Asm-Lift Gate Release
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
FAQ for Door Lock Switch Repair
Q: What is the preliminary procedure for servicing the door lock and side window switch-driver side (with RPO AXE or AXC)?
A:
The procedure is to remove the driver-side door trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for servicing the door lock and side window switch-passenger side (with RPO AXE or AXC)?
A:
You shall remove the passenger side door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to service the front side door lock and side window switch assembly?
A:
You shall lift upward at the rear edge of the switch assembly then slide up and out of the door panel, disconnect the electrical connector from the switch assembly, and transfer parts as necessary.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the front side door lock and side window switch screws?
A:
The recommended torque is 3 N.m (27 lb in).
By Bob
GM Specialist
01/11/2022Q: How many screws does the front side door lock and side window switch have?
A:
It has 3 screws.
By Bob
GM Specialist
01/11/2022Q: How many screws does the front side door lock and side window switch attach?
A:
It attaches 3 screws.
By Bob
GM Specialist
01/11/2022Q: What is the door lock and side window switch service procedure?
A:
First, lift upward at the rear edge of the switch assembly then slide up and out of the door panel. Next disconnect the electrical connector from the switch assembly and transfer parts as necessary.
By Omar
GM Specialist
09/03/2022Q: What is the door lock and side window switch service procedure?
A:
First, remove the driver-side door trim panel and disconnect the electrical connectors. Tighten the front side door lock and side window switch screws to 3 Nm.
By Omar
GM Specialist
09/03/2022See more FAQs (3)