< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Inner Boot
PartNumber: 19210863
Product Specifications- Notes: Traverse
- Location: Driver Side; Passenger Side
- Item Dimensions: 6.5 x 6.3 x 5.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Inner Boot
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$122.68 MSRP:$195.68You Save: $73.00 (38%)
OEM (Genuine) 2010 Chevrolet Traverse Outer Boot Kit
PartNumber: 19210864
Product Specifications- Notes: Traverse
- Location: Driver Side; Passenger Side
- Item Dimensions: 6.6 x 6.3 x 5.8 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19206498, 15918509
- Part Description: 2010 Chevrolet Traverse Outer Boot Kit
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
$41.36 MSRP:$68.46You Save: $27.10 (40%)
OEM (Genuine) 2010 Chevrolet Traverse Inner Boot
PartNumber: 15855657
Product Specifications- Notes: W/AWD; Enclave, Traverse; Inner
- Location: Driver Side; Passenger Side
- Other Names: Boot, Inner Boot
- Item Dimensions: 11.6 x 4.8 x 4.8 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Inner Boot
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$109.87 MSRP:$175.24You Save: $65.37 (38%)
OEM (Genuine) 2010 Chevrolet Traverse Inner Boot
PartNumber: 23218688
Product Specifications- Notes: W/AWD; Enclave, Traverse; Outer
- Location: Driver Side; Passenger Side
- Other Names: Boot, Inner Boot, Outer Boot
- Item Dimensions: 11.6 x 4.9 x 4.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Inner Boot
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$106.60 MSRP:$176.46You Save: $69.86 (40%)
FAQ for Cv Joint Boot Repair
Q: How to install the front wheel drive shaft outer joint and boot?
A:
The proper way is to install the boot on the wheel drive shaft, the CV joint, the boot clamps, and the wheel drive shaft assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the front wheel drive shaft inner joint and boot?
A:
You shall remove the wheel drive shaft, the small boot clamp, and the large boot clamp from the boot, the boot, the inner tripot housing, the outer tripot spider retaining ring, the tripot spider, and the wheel drive shaft boot.
By Bob
GM Specialist
01/11/2022Q: How to install the rear wheel drive shaft inner joint and boot?
A:
You shall install the CV joint boot and clamp on the wheel drive shaft and CV joint housing, the CV joint boot and clamp CV joint housing, the outer CV joint and boot, and the wheel drive shaft.
By Bob
GM Specialist
01/11/2022Q: How to disassemble the rear wheel drive shaft inner joint and boot?
A:
You shall remove the wheel drive shaft, the outer CV joint and boot, the outer boot clamp and the inner boot clamp from the CV joint, the CV joint boot from the CV joint, and the wheel drive shaft.
By Bob
GM Specialist
01/11/2022Q: How to install the front wheel drive shaft inner joint and boot?
A:
The proper way is to install the boot, the tripot spider, the outer tripot spider retaining ring, the tripot housing, the wheel drive shaft boot, and the wheel drive shaft.
By Bob
GM Specialist
01/11/2022Q: How to remove the front wheel drive shaft outer joint and boot?
A:
You shall remove the wheel drive shaft, the boot clamp from the constant velocity (CV) joint and the boot, the boot clamp from the boot and the wheel drive shaft, the CV joint from the wheel drive shaft, and the boot from the wheel drive shaft.
By Bob
GM Specialist
01/11/2022Q: How do you install the RWD shaft outer joint and boot?
A:
You can make sure that the boot is properly seated, install the retaining ring, and install the wheel drive shaft.
By Omar
GM Specialist
10/03/2022Q: How do you install the shaft outer joint and boot?
A:
You can make sure that the boot is properly seated, and install the boot clamp, and the wheel drive shaft to the vehicle.
By Bob
GM Specialist
10/03/2022Q: How do you remove the front wheel drive shaft inner joint?
A:
You can remove the wheel drive shaft, the tripot housing, and the wheel drive shaft boot.
By Omar
GM Specialist
10/03/2022Q: What is the installation procedure for the wheel drive shaft inner joint?
A:
The procedure is to install the boot, the inner tripot retaining ring, the tripot housing, and the wheel drive shaft.
By Bob
GM Specialist
08/03/2022See more FAQs (9)