Part Description: 2010 Chevrolet Traverse Engine Coolant Recovery Tank
More Info
Vehicle Fitment
2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$42.57
FAQ for Coolant Reservoir Repair
Q: What is the recommended torque for coolant recovery reservoir bolts?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the preliminary procedure for servicing the coolant recovery reservoir?
A:
The procedure is to.
By Bob
GM Specialist
01/11/2022
Q: How many bolts does the coolant recovery reservoir attach?
A:
It attaches 2 bolts.
By Bob
GM Specialist
01/11/2022
Q: How many bolts does the coolant recovery reservoir have?
A:
The coolant recovery reservoir has a total of 2 bolts.
By Bob
GM Specialist
10/03/2022
FAQ for Other Repair Info
Q: How to remove the water pump?
A:
You shall remove the drive belt, the right engine strut mount, the right engine mount strut bracket, the Water Pump pulley, the water pump, and the water pump seal.
Q: What should be noticed while servicing the radiator's lower grille?
A:
You shall release the retainer tabs securing the lower Radiator grille to the front bumper fascia opening.
Q: How to install the engine coolant temperature sensor?
A:
You shall install the ECT sensor, connect the engine wiring harness electrical connector to the ECT sensor, slide the electrical connector heat shield down over the connector, and fill the cooling system.