< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Cigarette Lighters
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Lighter Housing
PartNumber: 25774623
Product Specifications- Notes: Driver Side
- Location: Driver Side
- Item Dimensions: 2.8 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999477, 12450044, 01999477
- Part Description: 2010 Chevrolet Traverse Lighter Housing
Vehicle Fitment- 2010 Chevrolet Traverse | High Country, L, LS, LT, LTZ, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
$7.04 MSRP:$10.60You Save: $3.56 (34%)
FAQ for Cigarette Lighters Repair
Q: What is the preliminary procedure for servicing the 120-Volt accessory power receptacle?
A:
The procedure is to remove the front floor console rear trim panel. I.
By Bob
GM Specialist
29/10/2022Q: How many nuts does the accessory AC/DC power control module attach?
A:
It attaches 2 nuts.
By Bob
GM Specialist
29/10/2022Q: How to service the accessory AC/DC power control module assembly?
A:
You shall disconnect the electrical connections, and remove the jack assembly.
By Bob
GM Specialist
29/10/2022Q: How to remove the accessory power receptacle assembly?
A:
You shall push in the 4 tabs to release the accessory power receptacle from the rear console trim plate.
By Bob
GM Specialist
29/10/2022Q: How to install the cigar lighter receptacle or 12-volt accessory power receptacle?
A:
You shall route the connector through the retainer, install the retainer by pressing it into place fully seated, connect the electrical connector to the receptacle, and install the accessory power receptacle and the accessory power receptacle fuse.
By Bob
GM Specialist
29/10/2022Q: How to remove the cigar lighter receptacle or 12-volt accessory power receptacle?
A:
You shall remove the auxiliary power outlet fuse from the fuse block, place one side of the °T° portion of the J 42059 into the tab window, insert the other side of the °T° into the opposite tab window, and pull the receptacle straight out.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for accessory AC/DC power control module nuts?
A:
The recommended torque is 9 N.m (80 lb In).
By Bob
GM Specialist
29/10/2022Q: How do you remove the cigar lighter receptacle?
A:
You can remove the auxiliary power outlet fuse, and the receptacle, and release the lighter socket.
By Omar
GM Specialist
10/03/2022Q: What is the installation procedure for the cigar lighter receptacle?
A:
The procedure is to install the retainer, connect the electrical connector, and install the accessory power receptacle fuse.
By Omar
GM Specialist
08/03/2022See more FAQs (4)