Part Description: 2010 Chevrolet Malibu Handle Asm-Rear Side Door Inside *Chrome A
More Info
Vehicle Fitment
2010 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Part Description: 2010 Chevrolet Malibu Handle Asm-Rear Side Door Inside *Chrome A
More Info
Vehicle Fitment
2010 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Part Description: 2010 Chevrolet Malibu Handle Asm-Rear Side Door Inside T
More Info
Vehicle Fitment
2010 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Part Description: 2010 Chevrolet Malibu Handle Asm-Rear Side Door Inside *Chrome
More Info
Vehicle Fitment
2010 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Interior Door Handle Repair
Q: What is the installation procedure for the front side door inside handle?
A:
The procedure is to install a new door inside handle bezel to the door trim panel and a light tube to the top of the bezel, connect the electrical connector, and then install the front door trim panel.
By Bob
GM Specialist
01/11/2022
Q: How do you remove the front side door inside handle?
A:
You need to remove the front door trim panel, the front door inside handle to the front door, and the light tube from the top of the bezel, and then disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How many nuts does the Front Side Door Check Link have?
A:
The Front Side Door Check Link has a total of 2 nuts.
Q: What is the recommended torque for the front side door upper hinge to the body?
A:
The recommended torque is 26 Nm (19 lb-ft).
Q: What is the removal procedure for the lock cylinder clips?
A:
The procedure is to disconnect the door lock electrical connector and then remove the clip.