Part Description: 2010 Chevrolet Impala Window Regulator
More Info
Vehicle Fitment
2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Impala Window Regulator
More Info
Vehicle Fitment
2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Impala Window Regulator
More Info
Vehicle Fitment
2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Impala Window Regulator
More Info
Vehicle Fitment
2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Impala Power Window Regulator And Motor Assembly
Vehicle Fitment
2010 Chevrolet Impala | All Trims | All Engines
FAQ for Window Regulator Repair
Q: How many bolts hold the front side door window regulator?
A:
5 Bolts.
By Omar
GM Specialist
28/03/2022
Q: How many bolts hold the rear side door window regulator?
A:
6 Bolts.
By Bob
GM Specialist
28/03/2022
Q: What is the torque spec for the front side door window regulator bolts?
A:
10 Nm (89 in./lbs.).
By Omar
GM Specialist
23/03/2022
Q: What is the torque spec for the rear side door window regulator bolts?
A:
10 Nm (89 in./lbs.).
By Bob
GM Specialist
23/03/2022
FAQ for Other Repair Info
Q: What is the removal process for the rear side door window channel?
A:
You will need to remove the rear door trim, the rear door water deflector, and the Window Channel bolts, and you will need to move the window to the full down position.
Q: How do I disengage the switch from the bezel?
A:
Use a flat-bladed tool to help disengage the switch from the bezel.