Part Description: 2010 Chevrolet Impala Vehicle Speed Sensor
More Info
Vehicle Fitment
2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Impala Vehicle Speed Sensor
More Info
Vehicle Fitment
2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$14.53
FAQ for Vehicle Speed Sensors Repair
Q: How do you properly remove the vehicle speed sensor?
A:
You need to remove the right wheel/tire, disconnect the sensor connector, remove the retaining bolt, remove the retaining bracket, and remove the o-ring on the sensor.
By Omar
GM Specialist
28/03/2022
Q: What are some of the components for the transmission?
A:
Some of the components are the following: the oil pump, case cover, control valve body, reverse band, and vehicle speed.
By Bob
GM Specialist
27/03/2022
Q: What is the torque spec for the VSS bolt?
A:
12 Nm (106 in./lbs.).
By Omar
GM Specialist
23/03/2022
FAQ for Other Repair Info
Q: How do I reset the TAP values?
A:
Use a scan tool to erase all learned values in the cells.
Q: How do you install the automatic transmission fluid filter and seal?
A:
You can install the new seal, the filter, and the gasket.
Q: How do you install the shift lever?
A:
You can install the shift lever screws, connect the electrical connector, and install the column trim covers.