< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Impala
< Back to View All
Lift Supports
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Impala Strut
PartNumber: 25964300
Product Specifications- Notes: W/O Spoiler
- Location: Driver Side; Passenger Side
- Other Names: Lift Cylinder, Strut
- Item Dimensions: 14.1 x 1.4 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284658
- Part Description: 2010 Chevrolet Impala Strut
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$23.06 MSRP:$36.27You Save: $13.21 (37%)
StrongArm® Trunk Lid Lift Support for 2010 Chevrolet Impala
PartNumber: 6255Product Specifications- Notes: with Spoiler
- Body: 18.00
- BODY CONNECTION: ball socket (nylon) 8mm
- Brackets: No
- Compressed Length: 8.31
- Extended Length: 12.31
- Force: 90.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 4.00
- UPC: 845998015359
- Part Description: 2010 Chevrolet Impala Trunk Lid Lift Support
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | All Engines
$16.08OEM (Genuine) 2010 Chevrolet Impala Strut
PartNumber: 25964299
Product Specifications- Notes: W/Spoiler
- Location: Driver Side; Passenger Side
- Other Names: Lift Cylinder, Strut
- Item Dimensions: 14.7 x 1.3 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284657
- Part Description: 2010 Chevrolet Impala Strut
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$24.06 MSRP:$36.31You Save: $12.25 (34%)
StrongArm® Trunk Lid Lift Support for 2010 Chevrolet Impala
PartNumber: 4071Product Specifications- Notes: without Spoiler
- Body: 19.00
- BODY CONNECTION: ball socket (nylon) 8mm
- Brackets: No
- Compressed Length: 8.55
- Extended Length: 12.55
- Force: 74.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 4.00
- UPC: 845998003998
- Part Description: 2010 Chevrolet Impala Trunk Lid Lift Support
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | All Engines
$14.04
StrongArm® Trunk Lid Lift Support for 2010 Chevrolet Impala
PartNumber: 6672Product Specifications- Notes: without Spoiler
- Body: 18.00
- BODY CONNECTION: ball socket (nylon) 8mm
- Brackets: No
- Compressed Length: 8.28
- Extended Length: 12.28
- Force: 82.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 4.00
- UPC: 845998016059
- Part Description: 2010 Chevrolet Impala Trunk Lid Lift Support
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | All Engines
$12.97
FAQ for Trunk Lid Lift Support Repair
Q: What is the installation procedure for the rear compartment lid strut?
A:
The procedure is to press the rear compartment lid onto the rear compartment lid assist rod, the lower assist rod ball stud, and close the rear compartment.
By Omar
GM Specialist
25/03/2022Q: What is the proper way to remove the rear compartment lid strut?
A:
The proper way is to release the clip retainer and remove the lid assist rod.
By Omar
GM Specialist
25/03/2022