< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Impala
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Impala Throttle Body
PartNumber: 12609500
Product Specifications- Notes: Impala, Monte Carlo; 3.5l, 3.9l
- Other Names: Throttle Body
- Item Dimensions: 11.0 x 6.6 x 5.5 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12577029
- Part Description: 2010 Chevrolet Impala Throttle Body
Vehicle Fitment- 2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
$260.45 MSRP:$491.44You Save: $230.99 (48%)
Dorman® Throttle Body Assemblies for 2010 Chevrolet Impala
PartNumber: 977-008Product Specifications- Adjustable: No
- Color/Finish: Gray and Black
- Connector/Terminal Type: Male/Blade
- Electrical Connection Type: Female/Blade
- Housing Material: Aluminum
- Installation Hardware Included: Yes
- OE Part Number: 12609500, 217-3108
- UPC: 019495277132
- Part Description: 2010 Chevrolet Impala Throttle Body Assemblies
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$110.36
Cardone Reman® Remanufactured Throttle Body for 2010 Chevrolet Impala
PartNumber: 67-3002Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- Gaskets Included: Yes
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2010 Chevrolet Impala Remanufactured Throttle Body
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$90.82
hitachi® Fuel Injection Throttle Body for 2010 Chevrolet Impala
PartNumber: ETB0016Product Specifications- Notes: Grade: Actual OE; Terminal Quantity: 6; Availability: Available to Order; Bore Dia: 72.0; Gasket Or Seal Included: Yes; Idle Air Control Motor Included: No; Throttle Body Type: Electric; Throttle Position Sensor Included: Yes
- Actuation Type: Electric
- Bore Diameter: 72.0 mm
- Gasket or Seal Included: Yes
- Hardware Included: No
- Idle Air Control Motor Included: No
- Manufacturer: Hitachi
- New or Remanufactured: New
- OE Part Number: 12609500
- Qty Needed Per Unit: 1
- Terminal Connector Type: Blade
- Terminal Gender: Male
- Terminal Quantity: 6
- Throttle Body Type: Electric
- Throttle Position Sensor Included: Yes
- UPC: 840151060207
- Part Description: 2010 Chevrolet Impala Fuel Injection Throttle Body
Vehicle Fitment- 2010 Chevrolet Impala | LS | 6 Cyl 3.5L
- 2010 Chevrolet Impala | LT | 6 Cyl 3.5L
- 2010 Chevrolet Impala | LTZ | 6 Cyl 3.9L
- 2010 Chevrolet Impala | Police | 6 Cyl 3.9L
- 2010 Chevrolet Impala | LS | 6 Cyl 3.9L
$121.44
Spectra Premium® Fuel Injection Throttle Body for 2010 Chevrolet Impala
PartNumber: TB1010Product Specifications- Connector: 6 Pin Male
- Inside Diameter: 2 13/16"
- Length: 5 15/16"
- UPC: 627785015052
- Width: 5 1/4"
- Part Description: 2010 Chevrolet Impala Fuel Injection Throttle Body
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
FAQ for Throttle Body Repair
Q: How do you clean the throttle body?
A:
You can remove the air cleaner, and the body bore, and install the air cleaner outlet duct.
By Bob
GM Specialist
29/03/2022Q: How do you install the throttle body?
A:
You can install a throttle body gasket, the heater inlet, connect the ETC electrical connector, and the intake manifold cover.
By Bob
GM Specialist
28/03/2022Q: What does the ECM do?
A:
It is the control center for the throttle actuator system which determines what the driver is trying to do based on signals coming from the accelerator pedal.
By Bob
GM Specialist
26/03/2022Q: What is the proper way to remove the throttle body?
A:
The proper way is to remove the intake manifold cover, the air cleaner outlet duct, the heater inlet, and the throttle.
By Omar
GM Specialist
25/03/2022