2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Impala Hvac Heater Blend Door Actuator
More Info
Vehicle Fitment
2010 Chevrolet Impala | All Trims | All Engines
$20.67
FAQ for Hvac Heater Blend Door Actuator Repair
Q: How many screws hold the left temperature actuator?
A:
2screws.
By Bob
GM Specialist
27/03/2022
Q: How many screws hold the mode valve assembly?
A:
7screws.
By Omar
GM Specialist
27/03/2022
Q: How many screws hold the right temperature actuator?
A:
2screws.
By Omar
GM Specialist
27/03/2022
Q: What is the torque spec for the left temperature actuator screws?
A:
1.5 Nm (13 in./lbs.).
By Bob
GM Specialist
23/03/2022
Q: What is the torque spec for the mode valve assembly screws?
A:
1.5 Nm (13 in./lbs.).
By Bob
GM Specialist
23/03/2022
Q: What is the torque spec for the right temperature actuator screws?
A:
1.5 Nm (13 in./lbs.).
By Bob
GM Specialist
23/03/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How many screws do the floor air outlet cover and the heater core cover have?
A:
The air outlet cover has 7 screws and the Heater Core cover has a total of 7 screws.
Q: How do I install the Heater Outlet Hose?
A:
Start with installing both heater outlet hose clamps to the heater outlet hose. Next, install the heater outlet hose to the engine and at the heater core. Then Reposition the heater outlet hose clamp at the engine and heater core using the hose clamp pliers. Install the surge tank to the surge tank bracket. Lastly, fill the coolant.
Q: How do I install the Passenger Compartment Air Filter?
A:
Start with installing the passenger compartment air filter. Next, install the water deflector cover, the air inlet grill panel with retainers, the washer hose through the right air inlet grill panel clips, and the rear hood seal.