Part Description: 2010 Chevrolet Impala Cooler Asm, Trans Fluid Auxiliary
More Info
Vehicle Fitment
2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Automatic Transmission Oil Cooler Repair
Q: How do you remove the transmission auxiliary cooler?
A:
You need to remove the upper radiator air baffle, the auxiliary cooler bolts, the lower radiator air baffle, and the inlet and outlet lines from the support clips, and lower the cooler away from the vehicle.
By Omar
GM Specialist
28/03/2022
Q: What is the torque spec for the auxiliary cooler to lower radiator support bolts?
A:
10 Nm (89 in./lbs.).
By Omar
GM Specialist
23/03/2022
Q: What is the torque spec for the auxiliary cooler to upper radiator support bolts?
A:
25 Nm (18 ft./lbs.).
By Bob
GM Specialist
23/03/2022
FAQ for Other Repair Info
Q: How do I reset the TAP values?
A:
Use a scan tool to erase all learned values in the cells.
Q: How do you install the automatic transmission fluid filter and seal?
A:
You can install the new seal, the filter, and the gasket.
Q: How do you install the shift lever?
A:
You can install the shift lever screws, connect the electrical connector, and install the column trim covers.