< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Impala
< Back to View All
Air Filters & Intake Systems
- Department
- Color
- Brands
- Prices
Dorman® Air Intake Hose for 2010 Chevrolet Impala
PartNumber: 696-728Product Specifications- Clamps Included: No
- Color: Black
- Configuration: One Piece
- Emissions Sensor Port Equipped: No
- End 1 Shape: Round
- Grade Type: Regular
- Hose End Shape: Round
- Hose Length: 4.44"
- Inlet Diameter: 3.42"
- Inside Diameter: 3.42"
- Length: 4.44"
- Material: Rubber
- Molded Hose: No
- OE Part Number: 10350742
- Outlet Diameter: 3.35"
- Outside Diameter: 3.3"
- Shape: Molded Assembly
- UPC: 019495392989
- Part Description: 2010 Chevrolet Impala Air Intake Hose
Vehicle Fitment- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2010 Chevrolet Impala | All Trims | 6 Cyl 3.9L
$53.00
FAQ for Air Intake Hose Repair
Q: How do you install the secondary air injection pipe?
A:
You can install the AIR pipe gaskets, the AIR pipe, and the catalytic converter.
By Bob
GM Specialist
28/03/2022Q: What is the proper way to remove the secondary air injection pipe?
A:
The proper way is to remove the catalytic converter, the secondary AIR shutoff, and the heat shield.
By Bob
GM Specialist
25/03/2022Q: What is the removal process for the air cleaner outlet duct?
A:
You need to remove the intake manifold cover, disconnect the PCV tube, loosen the air cleaner outlet duct clamp, remove the outlet duct, loosen the air cleaner outlet duct from the MAF, and remove the outlet duct from the MAF sensor.
By Bob
GM Specialist
24/03/2022Q: What is the removal process for the secondary air injection feed tube?
A:
You will need to remove the air cleaner outlet duct, disconnect the feed tube quick fitting, remove the air feed tube bolts, and disconnect the air feed quick fitting from the air pump.
By Omar
GM Specialist
23/03/2022Q: What is the removal process for the secondary air injection pump hose?
A:
You will need to disconnect the secondary air injection hose quick fitting from the air cleaner and air pump and remove the hose from the vehicle.
By Bob
GM Specialist
23/03/2022Q: What is the torque spec for the air feed tube bracket bolts?
A:
10 Nm (89 in./lbs.).
By Omar
GM Specialist
23/03/2022Q: What is the torque spec for the outlet duct clamp at the MAF sensor?
A:
3Nm (27 in./lbs.).
By Bob
GM Specialist
23/03/2022Q: What is the torque spec for the outlet duct clamp at the throttle body?
A:
3Nm (27 in./lbs.).
By Omar
GM Specialist
23/03/2022See more FAQs (3)