Part Description: 2010 Chevrolet Impala Evaporator Core
More Info
Vehicle Fitment
2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Evaporator replacement for this application may require considerable time, specialty tools, and training.
Core Depth Fraction: 2-7/8; 3
Core Depth MM: 73.025; 76.200
Core Height Fraction: 11; 11-1/8
Core Height MM: 279.400; 282.575
Core Width Fraction: 9-7/8
Core Width MM: 250.000; 250.825
Depth: 2.875; 3.000
Height: 11.000; 11.125
Inlet Fitting Outside Diameter: No. 8
Inlet Fitting Type: Block Fitting
Material: Aluminum
O-Ring A Number/Desc: [24402] / Slimline Washer
O-Ring A Quantity: 1
O-Ring B Number/Desc: [24403] / Slimline Washer
O-Ring B Quantity: 1
Outlet Fitting Type: Block Fitting
UPC: 096361548909
Width: 9.875
Part Description: 2010 Chevrolet Impala A C Evaporator Core
More Info
Vehicle Fitment
2010 Chevrolet Impala | All Trims | All Engines
$64.58
FAQ for A/C Evaporator Core Repair
Q: How many bolts hold the thermal expansion valve?
A:
2 Bolts.
By Omar
GM Specialist
28/03/2022
Q: How many screws fasten the evaporator case?
A:
17 screws.
By Omar
GM Specialist
27/03/2022
FAQ for Other Repair Info
Q: How many screws do the floor air outlet cover and the heater core cover have?
A:
The air outlet cover has 7 screws and the Heater Core cover has a total of 7 screws.
Q: How do I install the Heater Outlet Hose?
A:
Start with installing both heater outlet hose clamps to the heater outlet hose. Next, install the heater outlet hose to the engine and at the heater core. Then Reposition the heater outlet hose clamp at the engine and heater core using the hose clamp pliers. Install the surge tank to the surge tank bracket. Lastly, fill the coolant.
Q: How do I install the Passenger Compartment Air Filter?
A:
Start with installing the passenger compartment air filter. Next, install the water deflector cover, the air inlet grill panel with retainers, the washer hose through the right air inlet grill panel clips, and the rear hood seal.