2010 Chevrolet Express 3500 Universal Joints

You can position the universal bearings on either side of the yoke on the propeller shaft, install the universal joint spider, press the universal joint spider, install the retaining ring in the yoke, rotate the propeller shaft and the universal joint, install the other two universal bearings and wrap them with electrical tape or equivalent to hold the bearing in place, position the universal spider in the slip yoke, install the universal bearings in either side of the slip yoke, fully seat one of the universal spiders in the universal bearing, press the universal bearings into the slip yoke, install the retaining ring in the slip yoke, rotate the slip yoke, position the slip yoke in the propeller shaft and the universal bearing in the yoke of the propeller shaft, center the universal spider in the universal bearing, press the universal bearing into the yoke, install the retaining ring in the propeller shaft yoke, and then rotate the propeller shaft and the universal joint.

The procedure is to tap the yoke, remove the retaining ring from the yoke, support the propeller shaft and the universal joint opposite of the J-9522-3-U-Joint Bearing Separator, remove the universal bearing from the yoke, position the J-9522-5-U-Joint Bearing Spacer Remover on the universal joint, remove the universal bearing from the yoke, rotate the propeller shaft, remove the slip yoke from the propeller shaft, the retaining ring from the slip yoke, the universal bearing from the yoke and the spider from the slip yoke, and then clean the slip yoke and the propeller shaft yoke of any contaminates.