< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Express 3500
< Back to View All
Hoods
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Express 3500 Latch
PartNumber: 25721612
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 7.1 x 6.7 x 6.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85588601
- Part Description: 2010 Chevrolet Express 3500 Latch
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$127.09 MSRP:$191.74You Save: $64.65 (34%)
Dorman® OE Solutions Hood Latch for 2010 Chevrolet Express 3500
PartNumber: 820-207Product Specifications- Notes: wo/Keyless Entry; Packaging Type: Box; Pkg Quantity: 1
- Attachment Method: Bolt
- Cable Included: No
- Installation Instructions Included: No
- OE Part Number: 25721612, 15873422
- Thickness: 0.69 In.
- UPC: 885484893917
- Width: 5.5 In.
- Part Description: 2010 Chevrolet Express 3500 OE Solutions Hood Latch
Vehicle Fitment- 2010 Chevrolet Express 3500 | All Trims | All Engines
$93.05OEM (Genuine) 2010 Chevrolet Express 3500 Latch
PartNumber: 22872577
Product Specifications- Notes: W/Remote Start
- Other Names: Latch, Lock
- Item Dimensions: 6.4 x 4.2 x 4.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85588600
- Part Description: 2010 Chevrolet Express 3500 Latch
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$81.69 MSRP:$123.26You Save: $41.57 (34%)
FAQ for Hood Latch Repair
Q: What is the installation procedure for the hood primary and secondary latch?
A:
The procedure is to install the hood release cable to the hood latch, the hood latch to the radiator support, and the bolts retaining the hood latch to the radiator support, align the hood latch and the fasteners with the marks, tighten the bolts retaining the hood latch to the radiator support, and then close the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts?
A:
The recommended torque is 15 Nm (11 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you remove the hood's primary and secondary latch?
A:
You need to raise and support the hood, mark the location of the hood latch and the fasteners, and then remove the bolts retaining the hood latch to the radiator support, the hood latch from the radiator support, and the hood release cable from the hood latch.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the hood latch cover?
A:
The procedure is to install the hood latch cover, the push pin rivet retainers, and the radiator grille, and then close the hood.
By Bob
GM Specialist
01/11/2022Q: How do you remove the hood rear seal?
A:
You need to pull up on the rear hood seal, and then remove the rear hood seal from the cowl pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the hood rear seal?
A:
The procedure is to align the slot in the rear hood seal with the cowl pinch-weld flange, and then press the rear hood seal into place.
By Bob
GM Specialist
01/11/2022Q: How do you remove the hood latch cover?
A:
You need to raise and support the hood, and then remove the radiator grille, the push pin rivet retainers retaining the hood latch cover to the radiator support, and the hood latch cover from the radiator support.
By Bob
GM Specialist
01/11/2022See more FAQs (2)