Part Description: 2010 Chevrolet Express 3500 Lower Beam Bulb
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
Notes: Discontinued; 12V; 80W; Halogen; Single - Boxed; Off-Road Use Only; (w/halogen capsule headlamps)
UPC: 760687146865
Part Description: 2010 Chevrolet Express 3500 Fog Light Bulb
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | All Trims | All Engines
FAQ for Fog Light Bulbs Repair
Q: How do you install the rear fog lamp bulb?
A:
You can install the bulb to the socket, push in on the bulb and turn the bulb 1/4 turn clockwise, and then install the lens to the lamp assembly and the screws to retain the lens to the lamp assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the rear fog lamp bulb?
A:
The procedure is to remove the screws retaining the lens to the lamp and the lens from the lamp, push in on the bulb and turn the bulb 1/4 turn counterclockwise, and remove the bulb from the socket.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the screws to retain the lens to the lamp assembly?
A:
The recommended torque is 1.5 Nm (13 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you install the sealed beam headlamp?
A:
You can connect the electrical connector to the headlamp, and then install the headlamp to the housing, the retaining ring to the headlamp, and the screws to the retaining ring.
Q: What is the installation procedure for the backup lamp bulb?
A:
The procedure is to install the bulb to the socket, gently push in on the bulb and turn the bulb 1/4 turn clockwise, and then install the lens to the lamp assembly and the screws retaining the lens to the lamp assembly.