FAQ for Door Seal Repair
Q: How do you remove it?
A:
You need to remove the hinge pillar trim panel, the front door upper pillar garnish molding, the front door lower pillar garnish molding, and the front door stepwell mat, pull the door opening weatherstrip from the door opening pinch-weld flange, and then remove the door opening weatherstrip from the vehicle.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the sliding door weatherstrip?
A:
The procedure is to install the weatherstrip to the sliding side door, and then press the retainers in the weatherstrip into the holes in the sliding side door.
By BobGM Specialist
01/11/2022 Q: How do you install the front or rear side door lower weatherstrip?
A:
You can install the weatherstrip to the door, and then press the retainers in the weatherstrip into the holes in the door.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the intermediate side door check seal?
A:
The procedure is to remove the side front door check the strap seal from the door and then clean the side rear door of all of the old adhesive.
By BobGM Specialist
01/11/2022 Q: How do you remove the sliding door weatherstrip?
A:
You need to remove the weatherstrip from the sliding side door and the weatherstrip retainers from the holes in the sliding side door.
By BobGM Specialist
01/11/2022 Q: How do you install the intermediate side door weatherstrip?
A:
You need to install the door weatherstrip to the top of the door, and then press the retainers in the door weatherstrip into the holes in the door.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the front door opening weatherstrip?
A:
The procedure is to apply GM P/N 12345097 (Canadian P/N 10953479) or the equivalent, into the channel on the weatherstrip, and install the weatherstrip to the vehicle, the front door stepwell mat, the front door lower pillar garnish molding, the front door upper pillar garnish molding, and the hinge pillar trim panel.
By BobGM Specialist
01/11/2022 Q: How do you remove the intermediate side door weatherstrip?
A:
You need to remove the weatherstrip from the top of the door, pull the weatherstrip rearward to release the retainer from the side of the door, and then remove the weatherstrip and the retainers from the bottom of the door.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the body side upper front and rear access panel weatherstrip?
A:
The procedure is to open the cargo door, pull the cargo door seal from the cargo door open the pinch-weld flange, and then clean all the adhesive from the cargo door opening the pinch-weld flange.
By BobGM Specialist
01/11/2022 Q: How many retainers does the intermediate rear side door weatherstrip have?
A:
The intermediate rear side door weatherstrip has a total of 15 retainers.
By BobGM Specialist
01/11/2022 See more FAQs (16)