Part Description: 2010 Chevrolet Express 3500 Control Module
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2010 Chevrolet Express 3500 Control Module
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2010 Chevrolet Express 3500 Control Module
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2010 Chevrolet Express 3500 Control Module
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2010 Chevrolet Express 3500 Control Module
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$222.26MSRP: $352.90
You Save: $130.64 (38%)
FAQ for Body Control Module Repair
Q: How do you remove the body control module?
A:
You can remove the right side knee bolster trim panel, disconnect the electrical connectors from the body control module (BCM), release the tabs retaining the BCM to the bracket, and then remove the BCM from the vehicle.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the body control module?
A:
The procedure is to install the BCM into the bracket, connect the electrical connectors to the BCM, install the right side knee bolster trim panel, and then program the module if you replaced the BCM.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the stop lamp switch?
A:
The procedure is to snap the stop lamp switch onto the pushrod to the power brake booster, install the stop lamp switch with the pushrod on the brake pedal pin and brake switch retainer, and connect the electrical connector to the stop lamp switch and the battery negative cable.