Part Description: 2010 Chevrolet Express 3500 Run Lamp Bulb
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
Part Description: 2010 Chevrolet Express 3500 Stoplamp Bulb
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2010 Chevrolet Express 3500 Cargo Lamp Bulb
More Info
Vehicle Fitment
2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
$3.42MSRP: $6.18
You Save: $2.76 (45%)
FAQ for Back Up Light Bulbs Repair
Q: What is the installation procedure for the backup lamp bulb?
A:
The procedure is to install the bulb to the socket, gently push in on the bulb and turn the bulb 1/4 turn clockwise, and then install the lens to the lamp assembly and the screws retaining the lens to the lamp assembly.
By Bob
GM Specialist
28/10/2022
Q: What is the recommended bolt torque for the backup lamp bulb screws?
A:
The recommended bolt torque is 1.5 Nm (13 lb in).
By Bob
GM Specialist
28/10/2022
Q: How do you remove the backup lamp bulb?
A:
You can remove the screws from the lens to the lamp assembly and the lens from the lamp assembly, gently push in on the bulb and turn the bulb 1/4 turn counterclockwise, and then remove the bulb from the socket.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: How do you install the rear fog lamp bulb?
A:
You can install the bulb to the socket, push in on the bulb and turn the bulb 1/4 turn clockwise, and then install the lens to the lamp assembly and the screws to retain the lens to the lamp assembly.
Q: How do you install the sealed beam headlamp?
A:
You can connect the electrical connector to the headlamp, and then install the headlamp to the housing, the retaining ring to the headlamp, and the screws to the retaining ring.