< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Express 3500
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Express 3500 Side Sensor
PartNumber: 13502578
Product Specifications- Notes: Express, Savana; All
- Item Dimensions: 2.6 x 1.7 x 1.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Express 3500 Side Sensor
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$170.12 MSRP:$256.65You Save: $86.53 (34%)
OEM (Genuine) 2010 Chevrolet Express 3500 Side Impact Sensor
PartNumber: 20919984
Product Specifications- Other Names: Side Impact Sensor
- Item Dimensions: 2.2 x 2.1 x 1.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85668899
- Part Description: 2010 Chevrolet Express 3500 Side Impact Sensor
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$165.03 MSRP:$248.98You Save: $83.95 (34%)OEM (Genuine) 2010 Chevrolet Express 3500 Side Impact Sensor
PartNumber: 20919985Product Specifications- Notes: Front
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor
- Item Dimensions: 4.3 x 2.3 x 2.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15281885
- Part Description: 2010 Chevrolet Express 3500 Side Impact Sensor
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$162.58 MSRP:$255.70You Save: $93.12 (37%)
Dorman® OE Solutions Air Bag Impact Sensor for 2010 Chevrolet Express 3500
PartNumber: 590-231Product Specifications- Notes: w/RPO Code AJ3 (Front Seat Air Bags); w/RPO Code AK5 (Driver & Passenger Front Seat Air Bags); Mounted to Lower Tie Bar
- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 20919987
- Package Quantity: 1
- UPC: 885484445017
- Part Description: 2010 Chevrolet Express 3500 OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2010 Chevrolet Express 3500 | All Trims | All Engines
OEM (Genuine) 2010 Chevrolet Express 3500 Side Impact Sensor
PartNumber: 20919986Product Specifications- Notes: Rear
- Location: Driver Side
- Other Names: Side Impact Sensor
- Item Dimensions: 3.4 x 2.1 x 2.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15281886
- Part Description: 2010 Chevrolet Express 3500 Side Impact Sensor
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Air Bag Sensor Repair
Q: What is the removal procedure for the instrument panel inflatable restraint module switch?
A:
You can squeeze the retaining tabs on the back of the switch first, and then push the switch out of the cluster trim bezel assembly.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the inflatable restraint side impact sensor-left side rear
A:
You will need to disable the SIR system and then remove the left-side trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the inflatable restraint front-end sensor?
A:
The procedure is to remove any dirt, grease, or other impurities from the mounting surface, point the arrow on the sensor toward the front of the vehicle, install the inflatable restraint front-end sensor, push the sensor towards the rear of the vehicle to seat the sensor in the keyhole slot in the lower radiator support, connect the inflatable restraint front end sensor electrical connector, install the connector position assurance to the electrical connector, remove the safety stands and lower the vehicle, and then enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts?
A:
The recommended torque is 7 Nm (62 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you remove the inflatable restraint front-end sensor?
A:
You need to disable the SIR, raise the vehicle and support, remove the connector position assurance, disconnect the inflatable restraint front end sensor electrical connector, loosen the inflatable restraint front end sensor mounting nut, slide the inflatable restraint front end sensor towards the front of the vehicle, and then remove the sensor from the keyhole slot in the lower radiator support.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the side impact inflatable restraint sensor have?
A:
The side impact inflatable restraint sensor has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the front inflatable restraint side impact sensor?
A:
You will need to disable the SIR system, and then remove the front side trim panel and the front side door water deflector.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nuts?
A:
The recommended torque is 10 Nm (88 lb in).
By Bob
GM Specialist
01/11/2022Q: How many nuts does the inflatable restraint vehicle rollover sensor have?
A:
The inflatable restraint vehicle rollover sensor has a total of 3 nuts.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the inflatable restraint vehicle rollover sensor?
A:
You can disable the SIR and then remove the front floor mat/carpet.
By Bob
GM Specialist
01/11/2022See more FAQs (11)