< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Express 3500
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Express 3500 Clock Spring
PartNumber: 20906820
Product Specifications- Notes: 1 Ton
- Other Names: Clock Spring
- Item Dimensions: 5.2 x 4.4 x 2.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25976911, 25952982
- Part Description: 2010 Chevrolet Express 3500 Clock Spring
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$206.96 MSRP:$312.17You Save: $105.21 (34%)OEM (Genuine) 2010 Chevrolet Express 3500 Coil Asm-Inflator Restraint Steering Wheel Module
PartNumber: 15945451
Product Specifications- Notes: Express, Savana; 1 Ton
- Other Names: Clock Spring
- Item Dimensions: 7.1 x 6.6 x 6.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Express 3500 Coil Asm-Inflator Restraint Steering Wheel Module
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Air Bag Clockspring Repair
Q: What do you need to pay attention to?
A:
You should not rotate the SIR coil more than 3 turns counterclockwise from the center position.
By Bob
GM Specialist
01/11/2022Q: How do you do if a double wire harness strap is installed onto the wire harness assembly and the column?
A:
You can reuse the holder for the wire straps during the installation.
By Bob
GM Specialist
01/11/2022Q: How do you remove the steering wheel inflatable restraint module coil?
A:
You need to disable the SIR System, remove the steering wheel from the steering shaft, pull the tilt lever straight out from the steering column if equipped with a tilt column, and then remove the steering column trim covers, the wire harness straps from the steering wheel column wire harness, the retaining ring and the SIR coil from the steering shaft.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the steering wheel inflatable restraint module coil?
A:
The procedure is to align the SIR coil assembly with the horn tower on the turn signal cancel cam assembly, slide the SIR coil onto the steering shaft assembly, firmly seat the retaining ring into the groove on the steering shaft assembly, remove the centering tab if a centering tab is on the SIR coil, install the steering column trim covers, align the tilt lever into the steering column if equipped with a tilt column, install the steering wheel onto the steering shaft, remove the J-42640-pin, and then enable the SIR system.
By Bob
GM Specialist
01/11/2022