< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Wipers & Washers
- Department
- Location
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Washer Pump
PartNumber: 84134930
Product Specifications- Notes: 2nd Design
- Other Names: Washer Pump
- Item Dimensions: 6.2 x 3.1 x 3.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20907279
- Part Description: 2010 Chevrolet Equinox Washer Pump
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$24.28 MSRP:$43.95You Save: $19.67 (45%)
ACI® Front Windshield Washer Pump for 2010 Chevrolet Equinox
PartNumber: 372693Product Specifications- Notes: 2nd Design
- Adapter: Not Included
- Condition: New
- Connector Type: OEM Style
- Meets or Exceeds OEM Specifications: Yes
- Mounting Hardware: Not Included
- Nozzle Quantity: 2
- UPC: 080738726939
- Voltage: 12V
- Part Description: 2010 Chevrolet Equinox Front Windshield Washer Pump
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | All Engines
$12.65
Anco® Windshield Washer Pump for 2010 Chevrolet Equinox
PartNumber: 67-54Product Specifications- Notes: 2nd Design
- Gasket or Seal Included: No
- Hose Port Quantity: 2
- Mounting Hardware Included: No
- Universal Or Specific Fit: Specific
- UPC: 037577010767
- Part Description: 2010 Chevrolet Equinox Windshield Washer Pump
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | All Engines
OEM (Genuine) 2010 Chevrolet Equinox Pump Kit-Windshield Washer W/ Seal
PartNumber: 20907278
Product Specifications- Notes: 1st Design; Equinox, Terrain
- Other Names: Washer Pump
- Item Dimensions: 5.1 x 4.1 x 2.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25942554
- Part Description: 2010 Chevrolet Equinox Pump Kit-Windshield Washer W/ Seal
Vehicle Fitment- 2010 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
FAQ for Washer Pump Repair
Q: What should you do before replacing the Windshield Washer Pump (Equinox)?
A:
You should remove the driver-side wheelhouse liner, place a clean suitable drain pan under the windshield washer solvent container, disconnect the windshield washer pump electrical connector, disconnect the windshield washer pump front hose, disconnect the rear washer system pump hose, disengage the washer pump from the washer container and then pry upward to remove the pump from the washer container grommet.
By Bob
GM Specialist
01/11/2022Q: What should you install before installing a new windshield washer pump?
A:
You should install a new grommet.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Windshield Washer Pump Hose (Equinox)?
A:
You should open and support the hood, remove the left side front bumper fascia opening cover, disconnect the windshield washer pump hose from the windshield washer nozzle hose at the left side fender flange, remove the driver side wheelhouse liner, place a clean suitable container under the windshield washer container and disconnect the windshield washer pump hose from the windshield washer pump spout.
By Bob
GM Specialist
01/11/2022