2010 Chevrolet Equinox Shift Interlock Solenoid

You can install a new control solenoid valve assembly filter plate, install the control solenoid valve body and TCM assembly, rotate the control solenoid valve spring, install the 4 control valve body bolts M6 x 80, the control valve body bolt M6 x 55, the 3 control valve body bolts M6 x 95, the control valve body bolt M6 x 42 and the 2 control valve body bolts M6 x 65, connect the input and output speed sensor electrical connectors, connect the shift position switch electrical connector, install the control valve body cover and finally perform the transmission adaptive values learn procedure.

You can remove the transmission control valve body cover, disconnect the input and output speed sensor electrical connectors, disconnect the shift position switch electrical connector, remove the 3 control valve body bolts M5 x 40.5, the 12 control valve body bolts M6 x 97, the control solenoid valve assembly with transmission control module and the control solenoid valve assembly filter plate and finally inspect the channel plate bolt pass through holes for damage or brinelling.

The procedure is to remove the control valve body cover, disconnect the input and output speed sensor electrical connectors, disconnect the shift position switch electrical connector, remove the 4 control valve body bolts M6 x 80, position the control solenoid valve spring to the side and remove the 2 control valve body bolts M6 x 65, the control valve body bolt M6 x 42, the 3 control valve body bolts M6 x 95, the control valve body bolt M6 x 55, the control solenoid valve body and transmission control module (TCM) assembly and the control solenoid valve assembly filter plate.