< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Seat Cushion Pad
PartNumber: 22784708
Product Specifications- Notes: W/O 8-Way Power; W/8-Way Power
- Other Names: Seat Cushion Pad
- Item Dimensions: 28.4 x 23.7 x 9.2 inches
- Item Weight: 5.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20811591
- Part Description: 2010 Chevrolet Equinox Seat Cushion Pad
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
OEM (Genuine) 2010 Chevrolet Equinox Seat Cushion Pad
PartNumber: 25999189
Product Specifications- Notes: Seat Cushion
- Other Names: Seat Cushion Pad
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Seat Cushion Pad
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Seat Cushion Pad Repair
Q: What should you remove before replacing the Driver or Passenger Seat Cushion Cover and Pad?
A:
You should remove the front seat, the front seat inner recliner finish cover, the front seat outer adjuster finish cover, the driver or passenger seat recliner handle, the front seat back cushion finish panel, and the video display.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear seat cushion frame bolts?
A:
You can tighten the bolts to 50 Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you remove the rear seat cushion cover?
A:
You can disconnect the rear seat cushion cover J-channels and straps from the rear seat cushion frame and remove the rear seat cushion cover from the rear seat cushion frame and assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the front seat back cushion frame bolts?
A:
You can tighten the bolts to 12 Nm (9 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Driver or Passenger Seat Cushion Frame?
A:
You should remove the front seat, the driver or passenger seat outer adjuster finish cover and the driver or passenger seat inner recliner finish cover.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Rear Seat Cushion Cover and Pad?
A:
You should remove the rear seat, the rear seat center seat belt anchor bolt and belt, the rear seat recliner inner finish cover, the rear seat recliner outer finish cover, the rear seat outer recliner rear finish cover, and the rear seat floor filler trim guides.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Rear Seat Cushion Frame?
A:
You should remove the rear seat riser finish cover, the rear seat center belt anchor bolt and belt, the rear seat, and the seat cushion cover and pad.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Driver or Passenger Seat Back Cushion Finish Panel?
A:
You can pull the panel rearward at the bottom edge first to disengage the lower retainers, move the finished panel and side clips to one side, slide the panel downward and release the upper hooks from the seat back cushion pad support wire.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Front Seat Back Cushion Frame have?
A:
The Front Seat Back Cushion Frame has a total of 4 bolts.
By Bob
GM Specialist
01/11/2022Q: What should you do if replacing the seat cushion frame?
A:
You should transfer components as necessary.
By Bob
GM Specialist
01/11/2022See more FAQs (13)