2010 Chevrolet Equinox Piston

You can use the J-43966-1.

You can remove the oil pan, the cylinder head, the ring ridge, the connecting rod nuts, and the connecting rod cap, then remove the connecting rod and the piston out of the top of the engine block, clean the cylinder bores and finally swab the bores with the engine oil and a clean, dry cloth.

You can coat the piston, the piston rings, the cylinder bore, and the bearing surfaces with engine oil, install the piston, tap the top of the piston with a wooden hammer handle, hold the J 8037 firmly against the engine block, install the connecting rod caps onto their original connecting rods, align the numbers placed on the connecting rod and the connecting rod cap, then install the new connecting rod bolts and nuts, measure the connecting rod side clearance with a feeler gauge and install the cylinder head and the oil pan.