< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Hinge
PartNumber: 23227630
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Hinge
- Item Dimensions: 5.4 x 2.7 x 2.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25803445
- Part Description: 2010 Chevrolet Equinox Hinge
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Liftgate Hinge Repair
Q: How many nuts does the liftgate hinge have?
A:
The liftgate hinge has a total of 4 nuts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the liftgate lock striker bolts?
A:
You can tighten the bolts to 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Liftgate Hinge?
A:
You should remove the liftgate, lower the rear of the headliner and mark the liftgate hinge position to the body before removal.
By Bob
GM Specialist
01/11/2022Q: What should you do to ensure proper alignment?
A:
You should mark the location of the striker with a grease pencil to ensure proper alignment.
By Bob
GM Specialist
01/11/2022Q: How do you adjust the Liftgate Lock Striker?
A:
You can close the liftgate onto the striker, note if the liftgate drags on the striker, mark around the striker for reference of the original position, loosen the striker bolts, move the striker to eliminate drag on the striker and liftgate latch and achieve proper liftgate position within the liftgate opening, align the left/right liftgate position, align the in/out adjustment for proper liftgate seal engagement, verify correct alignment of the striker and then tighten the striker bolts.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the Liftgate Lock Striker?
A:
You should remove the rear-end trim finish panel.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Liftgate Lock Striker have?
A:
The Liftgate Lock Striker has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the liftgate hinge nuts?
A:
You can tighten the nuts to 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the striker bolts?
A:
You can tighten the bolts to 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (4)