< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Coil Springs
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Coil Spring
PartNumber: 20941297
Product Specifications- Notes: W/O AWD, 2.4 Liter; W/AWD, 2.4 Liter
- Location: Driver Side; Passenger Side
- Other Names: Coil Spring, Spring
- Item Dimensions: 10.0 x 5.6 x 5.3 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20839864, 20839862
- Part Description: 2010 Chevrolet Equinox Coil Spring
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
$110.56 MSRP:$200.10You Save: $89.54 (45%)
OEM (Genuine) 2010 Chevrolet Equinox Coil Spring
PartNumber: 20827083
Product Specifications- Notes: 2.4 Liter
- Location: Driver Side; Passenger Side
- Other Names: Coil Spring, Spring
- Item Dimensions: 17.5 x 7.8 x 7.3 inches
- Item Weight: 6.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20827103
- Part Description: 2010 Chevrolet Equinox Coil Spring
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
$111.50 MSRP:$210.41You Save: $98.91 (48%)
OEM (Genuine) 2010 Chevrolet Equinox Coil Spring
PartNumber: 20827104
Product Specifications- Other Names: Coil Spring, Spring
- Item Dimensions: 24.2 x 9.6 x 8.6 inches
- Item Weight: 8.10 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 20934798
- Part Description: 2010 Chevrolet Equinox Coil Spring
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ | 6 Cyl 3.0 L GAS
Centric® Premium™ Coil Springs for 2010 Chevrolet Equinox
PartNumber: 630.62218Product Specifications- UPC: 889590259902
- Part Description: 2010 Chevrolet Equinox Premium™ Coil Springs
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 4 Cyl 2.4L
Centric® Premium™ Coil Springs for 2010 Chevrolet Equinox
PartNumber: 630.66003Product Specifications- UPC: 889590260137
- Part Description: 2010 Chevrolet Equinox Premium™ Coil Springs
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 4 Cyl 2.4L
OEM (Genuine) 2010 Chevrolet Equinox Rear Spring
PartNumber: 20839863
Product Specifications- Notes: W/O AWD, 3.0 Liter; W/AWD, 3.0 Liter
- Location: Driver Side; Passenger Side
- Other Names: Coil Spring, Spring
- Item Dimensions: 14.8 x 8.3 x 7.4 inches
- Item Weight: 7.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20839865, 25839863
- Part Description: 2010 Chevrolet Equinox Rear Spring
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Coil Springs Repair
Q: How do you replace the Strut, Strut Component, or Spring?
A:
You can install the strut assembly in the J 45400, compress the spring, remove the strut shaft nut, lower the strut, remove the upper mount assembly, remove the strut dust shield, remove the hollow bumper from the strut shaft and inspect the spring for damage.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Rear Spring Insulator?
A:
The procedure is to remove the coil spring and remove the upper and lower rubber insulators from the coil spring.
By Bob
GM Specialist
01/11/2022Q: How do you install the Coil Spring?
A:
You can inspect the coil spring upper and lower insulators, position the spring with the rubber insulators into the vehicle, raise the jack stand, position the lower control arm to the knuckle, install the nut and bolt, tighten the lower control arm to support nut and bolt, install the shock to the lower control arm nut and bolt, remove the jack stand, install the stabilizer shaft link, install the rear tire and wheel assembly and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Coil Spring?
A:
The procedure is to raise the vehicle, remove the rear tire and wheel assembly, remove the stabilizer shaft link, position a jack stand underneath the lower control arm, raise the jack stand, remove the lower shock bolt and nut, loosen the lower control arm to support frame nut and bolt, remove the lower control arm to knuckle nut and bolt, lower the control arm and remove the coil spring and insulators.
By Bob
GM Specialist
01/11/2022Q: How do you install the Rear Spring Insulator?
A:
You can install the upper and lower rubber insulators to the coil spring and install the coil spring.
By Bob
GM Specialist
01/11/2022Q: How do you install the Strut, Strut Component, or Spring?
A:
You can extend the strut to its limit of travel, install the hollow bumper and dust boot, install the strut into the spring, assemble the upper spring seat onto the strut shaft, align the flat with the strut-to-knuckle mounting bracket, assemble the top mount onto the strut shaft, align the flat 180 degrees from flat on the upper spring seat, install the strut shaft nut, hold the strut shaft, tighten the shaft, release the tension on the J 45400 and remove the strut assembly from the J 45400.
By Bob
GM Specialist
01/11/2022See more FAQs (1)