< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Alignment Kits
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Mount Bolt
PartNumber: 11518630
Product Specifications- Notes: 3.0 & 3.6 Liter, 10x60
- Item Dimensions: 3.5 x 1.5 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Mount Bolt
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$4.43 MSRP:$7.02You Save: $2.59 (37%)
OEM (Genuine) 2010 Chevrolet Equinox U-Bolt Nut
PartNumber: 11516382
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 4.2 x 3.0 x 0.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22123946, 15702050, 15048124, 14013439
- Part Description: 2010 Chevrolet Equinox U-Bolt Nut
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$1.14 MSRP:$1.79You Save: $0.65 (37%)
OEM (Genuine) 2010 Chevrolet Equinox Motor Nut
PartNumber: 11516078
Product Specifications- Notes: W/O AWD, Upper
- Location: Driver Side; Passenger Side
- Item Dimensions: 1.6 x 1.5 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11518997, 11588927, 11508101
- Part Description: 2010 Chevrolet Equinox Motor Nut
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$4.66 MSRP:$7.39You Save: $2.73 (37%)
OEM (Genuine) 2010 Chevrolet Equinox Mount Brace Bolt
PartNumber: 11588743
Product Specifications- Notes: 3.0 Liter
- Item Dimensions: 3.2 x 1.5 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Mount Brace Bolt
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ, Premier, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$4.73 MSRP:$7.50You Save: $2.77 (37%)
FAQ for Camber and Alignment Kit Repair
Q: What may cause steering and vibration complaints?
A:
Steering and vibration complaints may be the result of improper alignment, wheel, and tire imbalance, and tire lead due to worn or improperly manufactured tires.
By Bob
GM Specialist
01/11/2022Q: What should you do if the front caster angle is not within specifications?
A:
You should inspect for suspension support misalignment or front suspension damage if the front caster angle is not within specifications.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the link-to-frame fastener bolt?
A:
You can tighten the bolt to 164 Nm (121 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the inner tie rod jam nuts?
A:
You can tighten the nuts to 70 Nm (52 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the upper control arm-to-frame bolt?
A:
You can tighten the bolt to 164 Nm (121 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you adjust the rear camber?
A:
You can loosen the upper control arm-to-frame fastener, rotate the upper control arm-to-frame fastener in the direction, snug the upper control arm-to-frame fastener, reinspect the rear camber specifications, hold the nut, tighten the upper control arm-to-frame bolt and repeat the procedure for the other rear wheel.
By Bob
GM Specialist
01/11/2022Q: What steps should you perform to measure the front and rear alignment angles?
A:
You should install the alignment equipment, jounce the front and the rear bumpers 3 times, measure the alignment angles, record the readings and adjust alignment angles to vehicle specification.
By Bob
GM Specialist
01/11/2022Q: How do you adjust the rear toe?
A:
You can loosen the suspension adjustment link-to-frame fastener, rotate the suspension adjustment nut in the direction, snug the suspension adjustment link-to-frame fastener, reinspect the rear toe specifications, hold the nut, tighten the link-to-frame fastener bolt and repeat the procedure for the other rear wheel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the strut to knuckle nuts and bolts?
A:
You can tighten the strut to knuckle nuts and bolts to 180 Nm (133 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you adjust the front camber?
A:
You can raise the vehicle, remove the wheel and tire assemblies, remove the strut to knuckle nuts and bolts, install new strut to knuckle nuts and bolts, adjust the camber to specifications, tighten strut to knuckle nuts and bolts and install the wheel and tire assemblies.
By Bob
GM Specialist
01/11/2022See more FAQs (6)